Subscribe to Our Youtube Channel
Related Manuals for Smartech GSK-10000
Summary of Contents for Smartech GSK-10000
- Page 1 User Guide ILLUMINATE • POWER • JUMP Model: GSK-10000 Rechargeable Jump Starter / LED Flashlight / Portable Power Bank PEAK CURRENT: 800A USB OUTPUT: 5V/2.1A & 9V/2A BATTERY CAPACITY: 10000mAh...
- Page 2 To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any equipment intended to be used in vicinity of battery. Review cautionary marking on these products and on engine. GSK-10000 USER GUIDE PAGE 2...
-
Page 3: Safety Information
10. When jump starting your vehicle do not place Jump Starter on the ground or at a height less than 18 inches. 11. Never charge or jump start a frozen battery. Store this item and charger in a cool dry place. GSK-10000 USER GUIDE PAGE 3... - Page 4 State of California to cause cancer and birth defects or other reproductive harm (California law requires this warning to be given to customers in the State of California). Wash hands after handling. GSK-10000 USER GUIDE PAGE 4...
-
Page 5: Technical Specifications
Operating Temperature -22°F - +122°F Charging Temperature 32°F - +104°F ABOUT THE GSK-10000 Features a 2-mode rechargeable 1W LED flashlight with 10000mAh power bank with 800 peak Amp jump starter function. The jump starter features: Spark Proof Protection, Reverse Polarity Pro-... - Page 6 ABOUT THE GSK-10000 GSK-10000 USER GUIDE PAGE 6...
-
Page 7: Using The Led Flashlight
TURNING ON THE GSK-10000/POWER LEVEL DISPLAY To turn on the GSK-10000 press the power button. The battery level of the internal lithium-ion battery will be displayed in the LED display. To turn off the unit, hold the power button for 3 seconds. - Page 8 Charging Cable into the Mini USB Port on the side of the GSK- 10000. Plug the other end of the cable into a USB wall charger adaptor. Plug the wall charger adaptor into a wall outlet. The LED display will show the charging status of the GSK-10000. See image below: GSK-10000...
- Page 9 Option 2: Car Charging To charge the GSK-10000 from your car, plug the Mini USB Charging Cable into the Mini USB Port on the side of the GSK- 10000. Plug the other end of the cable into a 12V to USB car adaptor.
- Page 10 ABOUT THE SMART JUMPER CABLES GSK-10000 USER GUIDE PAGE 10...
-
Page 11: Jump-Starting Procedure
This unit is only for emergency use, not for frequent commercial use! The ENGINE START socket is ALWAYS activated! Do not attempt to jumpstart your vehicle when the GSK-10000 Power Bank battery capacity is below 30%. Turn off the vehicle ignition and all accessories (radios, lights, air conditioners, etc.), and disconnect electronic devices. - Page 12 5 seconds of engine cranking. The jumpstart feature is designed for short term operation only, and more than 5 seconds may cause damage to the unit. Allow the GSK-10000 to cool down for at least 3 minutes after each jumpstarting.
- Page 13 POWER / CHARGE USB DEVICES To power or charge your USB devices, connect the USB device to one of the USB ports on the side of the GSK-10000. The number of times you can recharge a USB device will vary between devices.
-
Page 14: California Proposition
Crystalline silica from bricks and cement and other masonry products • Arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work GSK-10000 USER GUIDE PAGE 14... - Page 15 Contact Smartech Inc. Customer Service and Smartech Inc. will troubleshoot any issue via phone or e-mail. If the problem is not corrected by this method, Smartech Inc. will, at its option, authorize evaluation, repair or replacement of the defective part or component at a Smartech Inc.
- Page 16 Problems caused by parts that are not original parts. Limits of Implied Warranty and Consequential Damage Smartech Inc. disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental or consequential claim by anyonefrom using this product. THIS WARRANTY IS IN...
- Page 17 Published by: Smartech Inc. Copyright © 2020 by Smartech Inc. Reproductions of this work, in whole or in part, without written permission of the publisher are strictly prohibited. The publisher does not assume and herby disclaims any liability to any party for any loss or damage caused by any error or omission in this manual, whether such error results from negligence, accident, or any other cause.
Need help?
Do you have a question about the GSK-10000 and is the answer not in the manual?
Questions and answers
i did as you said it goes on as soon as i plug it in and does not charge the green triangle stays on it worke fine the first tie about 2 months ago what is wrong
If the Smartech GSK-10000 powers on but does not charge, with the green triangle indicator staying on, the issue could be due to improper connection to the power source, a faulty charging cable or adapter, or battery wear. Ensure the USB adaptor is properly plugged into a working power outlet, check the cable for damage, and confirm the battery has not reached the end of its lifespan. If the problem persists, contact Smartech Inc. Customer Service for troubleshooting.
This answer is automatically generated
have a GSK 100000 it will or charge plugged it in as shown keep showing 30% and will noe charge the percentage icon keeps blinking but it will not change I had it plugged in for over 40 minutes what **** i doing wrong
The Smartech GSK-10000 may not be charging and showing a blinking percentage icon due to improper connection, a faulty charging cable, or an issue with the power source. Ensure the Mini USB Charging Cable is securely connected to both the device and the power adaptor. If the issue persists, try using a different cable or power source. Additionally, check if the LED display shows charging status correctly. If none of these steps resolve the issue, contact Smartech Inc. Customer Service for troubleshooting.
This answer is automatically generated