Related Manuals for Nexen AIR CHAMP 5H60SE-E
Summary of Contents for Nexen AIR CHAMP 5H60SE-E
- Page 1 Enclosed, Spring-Engaged Tooth Clutch 5H60SE-E FORM NO. L-21187-A-1203 FORM NO. L-21187-A-1203...
- Page 2 In accordance with Nexen’s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical data listed in this manual are based on the latest information available at the time of printing and are also subject to change without notice.
- Page 3 CROSS SECTIONAL VIEW FIGURE 1 ITEM DESCRIPTION ITEM DESCRIPTION O-ring Seals Cylinder O-ring Seals Piston Square-Head Set Screws Drive Ring Spring Housing Drive Flange Springs Ball Bearing Cap Screws Ball Bearing Retaining Ring Retaining Ring Quad Seals Retaining Ring Hex Nuts Oil Seal FORM NO.
- Page 4 PARTS REPLACEMENT (NOTE: Refer to Figure 1.) DISASSEMBLY 1. Remove square-head Set Screws (Item 16) and Hex 4. Supporting the Cylinder (Item 2), press the Hub Nuts (Item 26) from unit. (Item 1) and Drive Flange (Item 5) out of the unit. WARNING 5.
- Page 5 AIR CHAMBER ASSEMBLY 1. Apply an adequate amount of Loctite 680 (or 6. Apply a thin coat of O-ring Lubricant to the quad equivalent) to evenly coat the outer races of the seal contact surfaces of the Drive Flange (Item 5) new Ball Bearing (Item 8);...
- Page 6 Buyer shall be obligated to pay or which Buyer may incur based upon, related to or arising out of its contracts with its customers or other third parties. In no event shall Nexen be liable for any amount of damages in excess of amounts paid by Buyer for Products or services as to which a breach of contract has been determined to exist.
Need help?
Do you have a question about the AIR CHAMP 5H60SE-E and is the answer not in the manual?
Questions and answers