Related Manuals for Nexen RB15
Summary of Contents for Nexen RB15
- Page 1 LINEAR MOTION CONTROL PRODUCTS User Manual Rail Brake RB15, RB20, RB25, RB30, RB35, RB45, RB55* and RB65* *RB55 and RB65 are currently not compliant. FORM NO. L-21326-G-0819...
- Page 2 In accordance with Nexen’s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical data listed in this manual are based on the latest information available at the time of printing and are also subject to change without notice.
-
Page 3: Table Of Contents
Table of Contents General Specifications -----------------------------------------------------------------------------------------------------------4 General Safety Precautions ----------------------------------------------------------------------------------------------------4 Installation ----------------------------------------------------------------------------------------------------------------------------5 Required Tools ------------------------------------------------------------------------------------------------------------------5 Air Connections ----------------------------------------------------------------------------------------------------------------5 Accessories ---------------------------------------------------------------------------------------------------------------------5 Mounting on a Rail ------------------------------------------------------------------------------------------------------------6 Alignment Verification --------------------------------------------------------------------------------------------------------7 Friction Facing Gap Adjustment -----------------------------------------------------------------------------------------7 Friction Facing Replacement ---------------------------------------------------------------------------------------------------8 Service Restrictions --------------------------------------------------------------------------------------------------------------8 Warranty ------------------------------------------------------------------------------------------------------------------------------9 FORM NO. -
Page 4: General Specifications
GENERAL SPECIFICATIONS Specifications Holding Force: Up to 3400 N (764 lbs) Release Pressure: 5.5 bar (80 psi) Service Temperature: 4.5 - 50 C (40 - 120 F) Backlash: See Tech Data Sheet Engagement Time: See Tech Data Sheet GENERAL SAFETY PRECAUTIONS CAUTION WARNING Watch for sharp features when... -
Page 5: Installation
AIR CONNECTIONS DANGER All Nexen pneumatically actuated devices require clean S u p p o r t t h e l o a d b e f o r e and dry air, which meet or exceeds ISO 8373.1: 2001 disengaging the Rail Brake. -
Page 6: Mounting On A Rail
Note: Brake width is slightly under carriage width. Screw Insertion Depth Socket Head Small gap (0.010) to be expected. Model (mm) Cap Screw Size Min. Max. RB15 M5 x 0.8 RB20 M6 x 1.0 RB25 M8 x 1.25 RB30 M10 x 1.5 RB35 M10 x 1.5... -
Page 7: Alignment Verification
[.005in]). Adjusting the brake to have a gap wider than this will cause performance reductions. 1. Disengage Brake. Nexen Label 2. Cut the label between the housing and the guide Figure 8 using a straight edge. Leave the label in place so it can act as a reference to the original position. -
Page 8: Friction Facing Replacement
S u p p o r t t h e l o a d b e f o r e Nexen recommends that all service be performed by disengaging the Rail Brake. Failure trained personnel. -
Page 9: Warranty
Buyer shall be obligated to pay or which Buyer may incur based upon, related to or arising out of its contracts with its customers or other third parties. In no event shall Nexen be liable for any amount of damages in excess of amounts paid by Buyer for Products or services as to which a breach of contract has been determined to exist.
Need help?
Do you have a question about the RB15 and is the answer not in the manual?
Questions and answers