Table of Contents
Advertisement
2.
Firmly tighten the Cup Lid onto the Cup
Support to ensure an airtight seal.
NOTE: To ensure an airtight seal, the gasket
inside the Cup Lid is lubricated by the factory.
If lubrication has washed away, apply Seal
Lube (included) to the gasket.
3.
Insert the Funnel into the Cup Lid, twist
to lock. Snap the Strainer into the Funnel
to strain your paint as you fill your cup.
Funnel
3A4749D
4.
NOTE: If the paint stops draining but you see
the cup is not full, use a stir stick to scrape
the captured debris on the top of the Strainer
until the paint resumes draining.
Strainer
The Strainer's Air Tube will prevent paint
from overfilling the cup. Fill the cup as
follows:
a.
Watching the Funnel (not the cup),
slowly pour paint into the Funnel.
When the paint stops draining
down, the cup is full.
b.
With the Funnel and Strainer still
attached to the cup, pour excess
paint from the Funnel back into the
paint can.
Setup
11
Advertisement
Table of Contents
