Advertisement
Local Web Server Access:
The connection may be tested by using a computer and a standard Ethernet cable. Connect the computer to the Ethernet
port on the transponder, launch a web browser (e.g. Chrome) and enter 192.168.100.1 in the address field. The "Overview"
page, as shown below, will appear and display connectivity, power levels and power supply status information such as
alarms, output voltage, output current and individual battery voltages. System Name, System Location, System Contact
and Common Logical ID may be edited on this page; when prompted for a User Name and Password, use "Alpha" and
"AlphaGet" .
Remote Web Server Access:
Connect the computer to the cable modem network, launch an web browser (e.g. Chrome) and enter the designated
transponder IP address in the address field. The "Overview" page will appear (Fig. 8).
Alpha Technologies Services, Inc. | 3767 Alpha Way, Bellingham, WA 98226, USA
Tel.: Toll Free North America: +1 800-322-5742 | Outside US: +1 360-647-2360 | Technical Support: +1 800-863-3364
For more information visit www.alpha.com
© 2023 Alpha Technologies Services, Inc., an EnerSys company. All Rights Reserved. Trademarks and logos are
the property of EnerSys and its affiliates except DOCSIS
Subject to revisions without prior notice. E.&O.E.
Fig. 8, Remote Server Web Page - Overview
, which is not the property of EnerSys.
®
017-891-B12-001, Rev. A (02/2023)
Advertisement
