Indesit IFW 6540 P IX Quick Manual page 2

1. SELECT A FUNCTION
To select a function, turn the selection knob to the symbol for the
function you require: the display will light up and an audible signal will
sound.
2. ACTIVATE A FUNCTION
To start the function you have selected, turn the thermostat knob
to set the temperature you require.
To interrupt the function at any time, switch off the oven, turn
the selection knob and the thermostat knob to
Please note: During cooking you can change the function by turning the
selection knob or adjust the temperature by turning the thermostat knob.
The function will not start if the thermostat knob is on 0 °C. You can set
the cooking time, cooking end time (only if you set a cooking time) and a
timer.
TURN & GO
To start the "Turn & Go" function, select the function
turning the selection knob on the relevant icon, keeping the
thermostat knob on the
To end the cooking, turn the selection knob on "
Please note: You can set the cooking end time and timer. To obtain
the best cooking results using the "Turn & Go" function, follow the
suggested weights for each kind of food in the following table.
Food
Roast veal, Roast Beef rare
Meat
Chicken / Leg of lamb in pieces
Salmon fillet / Baked fish (whole)
Fish
Fish en papillote
Stuffed vegetables
Vegetables
Salty cakes Quiche lorraine / Flan
Pasta Lasagne / Timbale of pasta or rice
Leavened cake / Plum cake
Pastry
Bread
3. PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a flashing icon
on the display indicate that the preheating phase has been
activated. At the end of this phase, an audible signal and the
fixed icon on the display will indicate that the oven has
reached the set temperature: at this point, place the food inside
and proceed with cooking.
Please note: Placing the food in the oven before preheating has finished
may have an adverse effect on the final cooking result.
After cooking and with the function deactivated, the icon
may continue to remain visible on the display even after the
cooling fan has switched off to indicate that there is residual
heat in the compartment.
Please note: The time after which the icon switches off varies because it
depends on a series of factors such as ambient temperature and function
used. In any case, the product should be considered to be off when the
pointer on the selection knob is at "
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the
the display.
and
/ icon.
".
Recipe Weight (kg)
Vegetable pie
Baked apples
Bread loaf
Baguettes
0
".
icon and "00:00" start flashing on
Use or
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Notes: To cancel the cooking time you have set, keep pressing
icon starts flashing on the display, then use
time to "00:00". This cooking time includes a preheating phase.
.
PROGRAMMING THE END COOKING TIME/DELAYED START
After a cooking time has been set, starting the function can be
delayed by programming its end time: press
and the current time start flashing on the display.
Use or
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused until
it starts automatically after the period of time that has been
calculated in order forcooking to finish at the time you have set.
0.6 - 0.7
Notes: To cancel the setting, switch the oven off by turning the selection
1.0 - 1.2
knob to the
0.9 - 1.0
Notes: Delay to start functionality is not available for Grill and Turbo Grill
0.8 - 1.0
functions.
1.8 - 2.5
END OF COOKING
An audible signal will sound and the display will indicate that
1.5 - 2.5
the function has finished.
1.0 - 1.5
1.5 - 2.0
0.9 - 1.2
1.0 - 1.5
0.5 - 0.6
Turn the selection knob to select a different function or to
position "
0.5 - 0.8
Please note: If the timer is active, the display will show "END" alternately
with the remaining time.
5. SETTING THE TIMER
This option does not interrupt or program cooking but allows
you to use the display as a timer, either during while a function is
active or when the oven is off.
Keep pressing
the display.
Use or
An audible signal will sound once the timer has finished
counting down the selected time.
Notes: To cancel the timer, keep pressing
flashing, then use
to set the cooking time you require, then press
to set the time you want cooking to end and press
position.
" to switch the oven off.
until the icon and "00:00" start flashing on
to set the time you require and press
to reset the time to "00:00".
until the
to reset the cooking
until the icon
to confirm.
until the icon starts