Intended Use; Exclusion Of Liability - ICS Schneider Messtechnik induQ IVMZ.2 Series Operating Manual

— IVMZ.2
Accessories:
 Connection cable with moulded M12x1 coupling socket.
 M12x1 coupling socket as component.

1.2 Intended use

The magnetic inductive flow sensor IVMZ.2 must only be used for measuring and
metering liquids with a minimum conductivity of 20 μS/cm.
WARNING! No safety component!
The magnetic inductive flow sensor of the series IVMZ.2 is no safety component in
ac- cordance with Directive 2006/42/EC (Machine Directive).
 Never use the IVMZ.2 as a safety
component.
The operational safety of the device supplied is only guaranteed by intended use. The speci-
fied limits ( § 9 "Technical data") may under no circumstances be exceeded.
Before installing the device, check that the wetted materials of the device are compatible with
the media being used ( § 9.2 "Materials table").
Measuring tube empty (or partially filled). / Conductivity too low.
The green LED may blink irregularly if the measuring tube of the IVMZ.2 is empty or
par-tially filled or if the conductivity of the fluid being used is too low. Random pulses
will be present at the output, but they do not represent an actual flow.
 Ensure that the measuring tube of the IVMZ.2 is always completely
filled
 § 4.1 "Installation instructions").
 Ensure that the conductivity of the fluid is at least 20 μS/cm.

1.3 Exclusion of liability

We accept no liability for any damage or malfunctions resulting from incorrect installation, in-
appropriate use of the device or failure to follow the instructions in this operating manual.
Technical changes reserved
Device description
- 5 -