Table of Contents
Advertisement
Device description
1
Device description
The
of the IVMZ.2 series is a flow sensor without moving parts. The meas-
urement is performed using magnetic induction.
The IVMZ.2 is used for measuring or metering water and electrically conductive fluids. The
compact design and independence from the intake and discharge sections allows the
IVMZ.2 to be used under a variety of conditions.
Versions:
The IVMZ.2 is available in different nominal sizes from DN 3 to DN 25.
Type plate:
You can find the type plate on the back of the IVMZ.2.
It contains the most important technical data.
1.1 Delivery, unpacking and accessories
All units have been carefully checked for their operational reliability before shipment.
Immediately after receipt, please check the outer packaging for damages or any signs of
improper handling.
Report any possible damages to the forwarder and your responsible sales representative.
In such a case, state a description of the defect, the type and the serial number of the de-
vice.
Report any in-transit damage immediately. Damage reported later shall not be recog-
nized.
Unpacking:
Carefully unpack the unit to prevent any damage.
Check the completeness of the delivery based on the delivery note.
Scope of delivery:
1x IVMZ.2 according to the order data.
1x Operating manual.
IMPORTANT!
Use the type plate to check if the delivered unit corresponds to your order.
In particular, for devices with electrical components, check to see if the correct power
supply voltage is specified.
- 4 -
• Ba_IVMZ.2_en • 06a/2021
— IVMZ.2
Advertisement
Table of Contents
