Wirings - ICS Schneider Messtechnik induQ IVMZ.2 Series Operating Manual

Electrical connection

5.1 Wirings

Pinout:
The pinout differs according to the chosen configuration of the device.
Pinout:
M12x1
 Connect the connection cable according to your version and the pinout on the type plate.
Supply voltage:
IVMZ.2 with frequency output:
Push-Pull:
*1: Push-Pull switching outputs of several IVMZ.2 may not be connected in parallel.
*2: Recommendation Pull-Up / Pull-Down resistance R
Ensure that the maximum signal current of 25 mA is not exceeded.
Use of frequency and analogue output
Push-Pull:
Recommendation for resistance R
Ensure that the maximum signal current of 25 mA is not exceeded.
- 12 -
Possible pinout:
Pin 1: +U
B
Pin 2: n. c. (not connected) / Analogue U/I
Pin 3: GND
Pin 4: Frequency
NPN Open Collector:
NPN Open Collector:
~2.5 kΩ (12 V) or ~5 kΩ (24 V).
L
PNP Open Collector:
~2.5 kΩ (12 V) or ~5 kΩ (24 V).
L
PNP Open Collector:
• Ba_IVMZ.2_en • 06a/2021
— IVMZ.2