Product Identification Plate - New Holland 16LA Operator's Manual

This manual contains information concerning the adjustment and maintenance of your New Holland Model 16LA
and 17LA Loader. You have purchased a dependable machine, but only by proper care and operation can you
expect to receive the performance and long service built into this loader. Please have all operators read this
manual carefully and keep it available for ready reference.
The 16LA was designed to mount on New Holland TC35A, 40A and 45A compact tractors, and TC35DA, 40DA
and 45DA compact tractors not equipped with Supersteer
New Holland TC35DA, 40DA and 45DA compact tractors equipped with Supersteer
intended to load and move materials with a variety of buckets or a fork.
Your New Holland dealer will instruct you in the general operation of your loader. (Refer to the "Delivery Report"
at the back of this manual.) Your dealer's staff of factory-trained service technicians will be glad to answer any
questions that may arise regarding the operation of your loader.
Your New Holland dealer carries a complete line of genuine New Holland service parts. These parts are
manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement
parts. Be prepared to give your dealer the model and PIN of the tractor and loader, when ordering parts. Locate
these numbers now and record them below. Refer to the "General Information" section of this manual for the
location of the model and PIN of your loader.
Loader Model
Loader PIN
This safety alert symbol indicates important safety messages in this manual. When you see this symbol,
carefully read the message that follows and be alert to the possibility of personal injury or death.
Pictures in this manual may show protective shielding open or removed to better illustrate a particular
feature or adjustment.
Be certain, however, to close or replace all shielding before operating the machine.
CNH America LLC is continually striving to improve its products. We reserve the right to make improvements or
changes when it becomes practical and possible to do so, without incurring any obligation to make changes or
additions to the equipment sold previously.
TO THE OWNER
Tractor Model
Tractor PIN

PRODUCT IDENTIFICATION PLATE

CAUTION
CAUTION
IMPROVEMENTS
0-1
front axles. The 17LA was designed to mount on
T
front axles only. It is
T