Foxconn 848P7MB Manual page 14

Memory
This motherboard includes two 184-pin slots with 2.5 V for DDR DIMM. so you
can install DDR 266/333/400 memory. You must install at least one memory
bank to ensure normal operation.
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory module
can be fixed in one direction only. Unlock a DIMM slot by pressing the module
clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Warning :
Be sure to unplug the AC power supply before adding or removing
expansion cards or other system peripherals, especially the
memory devices, otherwise your motherboard or the system
memory might be seriously damaged.
Chapter 2
104 Pins 80 Pins
848P7MB Series User Manual
Installation Instructions
9