Ac Adapter And Battery; Charge The Battery; Switch The Power On; Set The Language - Fluke OneTouch AT User Manual

AC Adapter and Battery

You can use the ac adapter or the included lithium ion battery to
supply power to the analyzer. The ac adapter recharges the
battery.

Charge the Battery

Before you use the battery for the first time, charge the battery
for about 2 hours with the analyzer turned off.
A fully-charged battery operates for approximately 4 hours of
typical use. The battery typically takes approximately 4 hours to
recharge from 10% to 90% when the analyzer is turned off.
You do not need to fully discharge the battery
before you recharge it.
The battery will not charge if its temperature is
outside the range of 32°F to 104°F (0°C to 40°C).

Switch the Power On

To turn on the analyzer, press the green power key +. The key
will illuminate and in a few seconds the HOME screen will appear.

Set the Language

On the HOME screen, tap the TOOLS
1
lower-left corner of the screen).
Scroll down to the Maintenance Tools section and tap
2
Language.
Select a language from the list.
3
Press the  key to return to the HOME screen.
4
Chapter 1: Get Acquainted
Notes
AC Adapter and Battery
icon (located in the
7