Number Format; Units For Length Measurements; Timeout Periods (Power-Down And Backlight); Power Line Frequency - Fluke OneTouch AT User Manual

Number Format

The analyzer can show decimal fractions with a decimal point
(0.00) or a comma (0,00).
On the HOME screen, tap TOOLS
1
Scroll down to the Maintenance Tools section and tap 0.0 or
2
0,0 on the Number button.

Units for Length Measurements

On the HOME screen, tap TOOLS
1
Scroll down to the Maintenance Tools section and tap ft for
2
feet or m for meters on the Length button.

Timeout Periods (Power-Down and Backlight)

To increase battery operating time, the analyzer can turn off the
backlight and/or automatically power down when you do not
press any keys for a specified period.
On the HOME screen, tap TOOLS
1
Scroll down to the Maintenance Tools section, and tap
2
Timeout Period.
Tap Backlight or Power Down.
3
Select a time. To always keep the backlight or analyzer on, tap
4
Disabled.

Power Line Frequency

Set the power line frequency to the power frequency in the area
where you will use the analyzer. This setting helps prevent
external ac noise from affecting wiremap and resistance
measurements.
On the HOME screen, tap TOOLS
1
Chapter 1: Get Acquainted
Set Preferences
.
.
.
.
31