Nortel 120 Using Manual page 117

Important! Before making connections, make sure you have the correct
cord set. Check it (read the label on the cable) against the following:
Power Cord Set
Power Cord Set
U.S.A. and Canada
Denmark
Switzerland
U.K.
Europe
Copyright © 2006, Nortel Networks
.
The cord set must be UL-approved and CSA
certified.
The minimum specifications for the flexible cord
are:
- No. 18 AWG - not longer than 2 meters, or
16 AWG.
- Type SV or SJ
- 3-conductor
The cord set must have a rated current capacity
of at least 0.5 A
The attachment plug must be an
earth-grounding type with NEMA 5-15P
(15 A, 125 V) or NEMA 6-15P (15 A, 250 V)
configuration.
The supply plug must comply with Section
107-2-D1, Standard DK2-1a or DK2-5a.
The supply plug must comply with SEV/ASE
1011.
The supply plug must comply with BS1363
(3-pin 13 A) and be fitted with a 5 A fuse which
complies with BS1362.
The mains cord must be <HAR> or <BASEC>
marked and be of type HO3VVF3GO.75
(minimum).
The supply plug must comply with CEE7/7
("SCHUKO").
The mains cord must be <HAR> or <BASEC>
marked and be of type HO3VVF3GO.75
(minimum).
IEC-320 receptacle.
BAP120
Using the Nortel Business Access Point 120
NN47921-301 01.01 Standard
1.0 August 2006
Regulatory compliances 117
Nortel Networks Confidential