Stp Status - Nortel 120 Using Manual

The Event Logs table displays the following information:
•
•
•
Error Messages—An example of a logged error message is: Station Failed
to authenticate (unsupported algorithm).
This message can be caused by any of the following conditions:
•
•
•

STP Status

The STP Status window shows the STP status for each port.
STP Status
•
•
•
•
Copyright © 2006, Nortel Networks
.
Log Time: The time the log message was generated.
Event Level: The logging level associated with this message. For a
description of the various levels, see
Event Message: The content of the log message.
Access point was set to Open Authentication, but a client sent an
authentication request frame with a Shared key.
Access point was set to Shared Key Authentication, but a client sent an
authentication frame for Open System.
WEP keys do not match: When the access point uses Shared Key
Authentication, but the key used by client and access point are not the
same, the frame is decrypted incorrectly, using the wrong algorithm and
sequence number.
ID: Displays the port ID number.
Priority: The priority designated to the specified port.
Path Cost: Displays the path cost value for the specified port.
Status: Displays if STP is enabled or disabled for the specified port.
Using the Nortel Business Access Point 120
NN47921-301 01.01 Standard
1.0 August 2006
"System log" (page
BAP120
WebUI navigation 109
68).
Nortel Networks Confidential