Webui Navigation - Nortel 120 Using Manual

46 System configuration management

WebUI navigation

The information in this chapter is organized to reflect the structure of the
WebUI screens for easy reference. However, Nortel recommends that you
configure a username and password as the first step under advanced
configuration to control management access to this device (For further
information, see
Menu
Menu
Menu
System
Identification
TCP / IP Settings
RADIUS
Authentication
Filter Control
VLAN
WDS Settings
AP Management
Copyright © 2006, Nortel Networks
.
"Administration" (page
Description
Configures basic
administrative and client
access
Specifies the host name
Configures the IP address,
subnet mask, gateway, and
domain name servers
Configures the RADIUS
server for wireless client
authentication and accounting
Configures MAC address
authentication
Filters communications
between wireless clients,
access to the management
interface from wireless clients,
and traffic matching specific
Ethernet protocol types
Enables VLAN support and
sets the management VLAN
ID
Configures bridge or repeater
modes for each radio interface
and sets spanning tree
parameters
Configures access to
management interfaces
BAP120
Using the Nortel Business Access Point 120
NN47921-301 01.01 Standard
1.0 August 2006
64)).
Page
See "System identification"
(page 48).
See "System identification"
(page 48).
See "TCP and IP settings"
(page 48).
See "RADIUS" (page 50)
See "Authentication" (page
52).
See "Filter control" (page
See "Ethernet" (page
Type Filter—Enables or
disables Ethernet filtering on
the port. (Default: VLAN).
See "WDS settings" (page
See "AP management" (page
63).
Nortel Networks Confidential
55).
124).
59).