Cadillac XT4 2023 Owner's Manual page 302

Read and follow all of the tyre sealant and
compressor kit instructions.
The kit includes:
1. Sealant Canister Inlet Valve
2. Sealant/Air Hose
3. Base of Sealant Canister
4. Tyre Sealant Canister
5. On/Off Button
6. Slot on Top of Compressor
7. Pressure Deflation Button
8. Pressure Gauge
9. Power Plug
10. Air Only Hose
Tyre Sealant
Read and follow the safe handling
instructions on the label adhered to the tyre
sealant canister (4).
Check the tyre sealant expiration date on
the tyre sealant canister. The tyre sealant
canister (4) should be replaced before its
expiration date. Replacement tyre sealant
canisters are available at your local dealer.
There is only enough sealant to seal one
tyre. After usage, the tyre sealant canister
must be replaced.
Vehicle Care
Using the Tyre Sealant and Compressor
Kit to Temporarily Seal and Inflate a
Punctured Tyre
When using the tyre sealant and compressor
kit during cold temperatures, warm the kit
in a heated environment for five minutes.
This will help to inflate the tyre faster.
If a tyre goes flat, avoid further tyre and
wheel damage by driving slowly to a level
place. Turn on the hazard warning flashers.
See Hazard Lights 0 116.
See If a Tyre Goes Flat 0 299 for other
important safety warnings.
Do not remove any objects that have
penetrated the tyre.
1. Remove the tyre sealant canister (4) and
compressor from its storage location. See
Storing the Tyre Sealant and Compressor
Kit 0 305.
2. Remove the air only hose (10) and the
power plug (9) from the bottom of the
compressor.
3. Place the compressor on the ground near
the flat tyre.
301