Retained Accessory Power (Rap); Shifting Into Park - Cadillac XT4 2023 Owner's Manual

184 Driving and Operating
Auto Stops may not occur and/or Auto
Starts may occur because:
The climate control settings require the
engine to be running to cool or heat the
vehicle interior.
The vehicle battery needs to charge.
The vehicle battery has recently been
disconnected.
Minimum vehicle speed has not been
reached since the last Auto Stop.
The accelerator pedal is depressed.
The engine or transmission is not at the
required operating temperature.
The outside temperature is not in the
required operating range.
The vehicle transmission is shifted out of
D (Drive) to any gear other than P (Park).
Certain driver modes have been selected.
See Driver Mode Control 0 199.
The vehicle is on a steep hill or grade.
The driver door has been opened or the
driver seat belt has been unfastened.
The bonnet has been opened.
The Auto Stop has reached the maximum
allowed time.
Auto Stop Disable Switch
The automatic engine Stop/Start feature can
be disabled and enabled by pressing
Auto Stop/Start is enabled each time you
start the vehicle.
h
When the indicator is illuminated, the
system is enabled.

Retained Accessory Power (RAP)

When the vehicle is turned from on to off,
the following features (if equipped) will
continue to function for up to 10 minutes,
or until the driver door is opened. These
features will also work when the vehicle is
on or in accessory mode:
Infotainment System
Power Windows (during RAP this
functionality will be lost when any door
is opened)
Sunroof (during RAP this functionality will
be lost when any door is opened)
Auxiliary Power Socket
Audio System
OnStar System

Shifting Into Park

To shift into P (Park):
1. Hold the brake pedal down and set the
Electric Parking Brake (EPB). See Electric
Parking Brake 0 196.
h
.
2. Press the button on top of the gear lever
to shift into P (Park). See Automatic
Transmission 0 190.
3. The P indicator on the gear lever will
turn red when the vehicle is in P (Park).
If the vehicle is shifted into P (Park) on a
hill, the Electric Parking Brake (EPB) may
apply automatically. You may not be
able to release the EPB using the EPB
switch. It should automatically release
when the vehicle is shifted out of
P (Park).