Phone) - Cadillac XT4 2023 Owner's Manual

Bluetooth (Pairing and Using a

Phone)

Pairing
A Bluetooth-enabled mobile device must be
paired to the Bluetooth system and then
connected to the vehicle before it can be
used. See the mobile device manufacturer's
user guide for Bluetooth functions before
pairing the device.
Pairing Information
If no mobile device has been connected,
the Phone main page on the infotainment
display will show the Connect Phone
option. Touch this option to connect.
Another way to connect is to touch the
Phones tab at the top right of the display
and then touch Add Phone.
A Bluetooth smartphone with music
capability can be paired to the vehicle as
a smartphone and a music player at the
same time.
Up to 10 devices can be paired to the
Bluetooth system.
The pairing process is disabled when the
vehicle is moving.
Pairing only needs to be completed once,
unless the pairing information on the
mobile phone changes or the mobile
phone is deleted from the system.
If multiple paired mobile phones are
within range of the system, the system
connects to the paired mobile phone that
is set to First to Connect. If there is no
mobile phone set to First to Connect, it
will link to the mobile phone which was
used last. To link to a different paired
mobile phone, see Linking to a Different
Phone later in this section.
Pairing a Phone
1. Make sure Bluetooth has been enabled
on the mobile phone before the pairing
process is started.
2. Touch the Phone icon on the Home Page
or the phone icon on the shortcut tray
near the bottom of the display.
3. Touch Phones at the top of the
infotainment display. There is also a
Connect Phones option in the middle of
the Phone display which will shortcut to
the Phone List menu.
4. Touch Add Phone.
Infotainment System
5. Select the vehicle name shown on the
infotainment display from your mobile
phone's Bluetooth Settings list.
6. Follow the instructions on the mobile
phone to confirm the six-digit code
showing on the infotainment display and
touch Pair. The code on the mobile
phone and infotainment display will
need to be acknowledged for a successful
pairing.
7. Start the pairing process on the mobile
phone to be paired to the vehicle. See
the mobile phone manufacturer's user
guide for information on this process.
Once the mobile phone is paired, it will
show under Connected.
8. If the vehicle name does not appear on
your mobile phone, there are a few
ways to restart the pairing process:
Turn the mobile phone off and then
back on.
Go back to the beginning of the
Phone menus on the infotainment
display and restart the pairing
process.
Reset the mobile phone, but this step
should be done as a last effort.
149