Table of Contents
Advertisement
5. To remove control panel assembly and PCB
1) Unplug the oven or turn off the power at the main power supply.
2) Remove the vent grille mounting 3 screws and open the door.
3) Slide the grille air to the left, then pull it straight out.
4) Remove a screw secured to the control panel assembly.
5) Pull out the connectors from the PCB.
6) Remove 5 screws of PCB.
7) Reverse the above steps for reassembly.
A00
NO
PART CODE
B01
9KC35116-0043300
B02
9KC35169-0030200
B03
9KC441G430171
B04
9KC35116-0043200
B05
9KC35116-0043100
B06
9KC65192-0030000
B07
9KC35167-0110800
B08
9KC35168-0000500
B09
9KC35137-0003100
B10
9KC40303-0115400
B11
9KC7122401211
1) Remove the screw which secure the control panel and draw forward the control panel assembly.
2) Remove 5 screws which secure the PCB assembly.
3) Pull out the PCB assembly from the control panel.
4) Disconnect membrane tail from the connector of the PCB assembly.
5) Remove the PCB from the control panel as.
6) Remove the membrane, lever door open, spring button and button door open from the control panel.
7) Reverse the above steps for reassembly.
PART NAME
DECORATOR BUTTON
BUTTON DOOR OPEN
SPRING DOOR BUTTON
DECORATOR C-PANEL *U
DECORATOR C-PANEL *T
SWITCH MEMBRANE
CONTROL-PANEL
BACK-PLATE AS
LEVER DOOR OPEN
MWO PCB MAIN ASSY
SCREW TAPPING
12
Q'TY
REMARK
1
1
2
1
1
1
1
1
1
1
4
Advertisement
Table of Contents
