Table of Contents
Advertisement
en Cleaning and servicing
Basic setting
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
and, at the same time,
2.
turn the programme selector to po-
sition 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 31
To change the value, press
4.
To save the changes, switch off
5.
the appliance.
32
Programme
position
Value
Description
changed to 10 A, the drying time
and energy consumption will be
higher.
→ "Consumption values",
Page 41
16 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Tips on cleaning and
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
/
.
care
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
Advertisement
Table of Contents
