Table of Contents
Advertisement
12.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 21
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 25
12.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Requirement: A programme is set.
→ "Setting a programme", Page 25
Adjust the programme settings.
▶
→ "Buttons", Page 18
Note: The programme settings are
not saved permanently for the pro-
gramme.
12.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 21
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 24
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
12.5 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 25
Press
.
▶
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".
12.6 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→ "Setting a programme",
Page 25
¡ The programme end time is set
and activated.
→ "Buttons", Page 19
Press
.
1.
The activated programme end time
is paused.
Press
until the display shows
2.
the required programme end time.
Press
.
3.
The changed programme end time
is activated.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press
.
1.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
.
5.
12.8 Cancelling the pro-
gramme
Press
.
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 26
operation en
25
Advertisement
Table of Contents
