Rear View Of The System - Dell VxRail E660 Installation And Service Manual

Item Ports, panels, and
slots
3 Right control panel
4 VGA port
5 Information tag
For more information about the ports, see the Dell VxRail E660, E660F, and E660N Technical Specifications.

Rear view of the system

The following figure shows the rear view of VxRail E660 and E660F with 2 x FH PCIe slots:
Item Ports, panels, or slots
1 BOSS S2 module
2 Power supply unit (PSU
1)
3 PCIe expansion card riser
(slot 1 - FH)
4 PCIe expansion card riser
(slot 2 - FH)
5 USB 2.0 port (1)
6 Power supply unit (PSU
2)
7 VGA port (on STD RIO
board)
8 USB 3.0 port (1)
9 iDRAC dedicated port
10 System identification
button
8 System overview
Icon Description
N/A Contains the power button, USB port, iDRAC Direct micro port, and the
iDRAC Direct status LED.
Enables you to connect a display device to the system.
N/A The Information tag is a slide-out label panel that contains system
information such as Service Tag and PSNT. If you have opted for the secure
default access to iDRAC, then the Information tag will also contain the iDRAC
secure default password.
Icon
N/A
N/A
N/A
Description
This slot supports the BOSS S2 module.
Indicates the PSU.
The expansion card riser enables you to connect PCI
Express expansion cards.
The expansion card riser enables you to connect PCI
Express expansion cards.
This port is USB 2.0-compliant.
Indicates the PSU.
Enables you to connect a display device to the system.
This port is USB 3.0-compliant.
Enables you to remotely access iDRAC.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.