Maintenance And Care; Minimize Wear And Avoid Damage - Stihl FCB-KM Instruction Manual

English

Maintenance and Care

The following intervals apply to normal
operating conditions only. If your daily
working time is longer or operating
conditions are difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All accessible screws and nuts
Check and retighten if necessary
N
Gearbox lubrication
Check about every 25 hours of
N
operation
Replenish as necessary – see
N
"Lubricating the Gearbox"
Depth wheel
Visual inspection before starting
N
work
Check tightness of wingnut before
N
starting work
Have replaced if necessary – see
N
"Replacing Wheel"
Skirt
Visual inspection before starting
N
work
Replace if damaged – see
N
"Replacing the Skirt"
Blade
Visual inspection before starting
N
work
Check tightness before starting
N
work
14
Have checked for out-of-balance if
N
necessary, replace if out-of-balance
– see "Replacing the Cutting Blade"
Replace if damaged – see
N
"Replacing the Cutting Blade"
Safety labels
Replace illegible safety labels
N
Minimize Wear and Avoid
Damage
Observing the instructions in this manual
and the KombiEngine manual helps
reduce the risk of unnecessary wear and
damage to the power tool.
The power tool must be operated,
maintained and stored with the due care
and attention described in these
instruction manuals.
The user is responsible for all damage
caused by non-observance of the safety
precautions, operating and maintenance
instructions. This includes in particular:
Alterations or modifications to the
–
product not approved by STIHL.
Using tools or accessories which
–
are neither approved or suitable for
the product or are of a poor quality.
Using the product for purposes for
–
which it was not designed.
Using the product for sports or
–
competitive events.
Consequential damage caused by
–
continuing to use the product with
defective components.
Maintenance Work
All the operations described in the
chapter on "Maintenance and Care"
must be performed on a regular basis. If
these maintenance operations cannot
be performed by the owner, they should
be performed by a servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
FCB-KM