Led Status Indication; Usb Connector Pinout - Advantech ICR-2701 User Manual

USB Socket Pinouts
USB socket pinouts is described in Figure
Signal mark
Pin
+5 V
1
2 USB data -
3 USB data +
GND
4

2.5 LED Status Indication

There are LED indicators on the front panel of the router to provide router status informa-
tion. Moreover, ETH connector, has two additional LEDs providing information about the port
status.
Caption Color
PWR Green
Green
Green
ETH0 Green
ETH1 Green
ETH0 Orange
ETH1 Orange
Orange
10
Figure 10: USB Connector Pinout
Description
Positive pole of 5 V DC supply voltage, 0.5 A
USB data signal – negative pole
USB data signal – positive pole
Negative pole of DC supply voltage
Table 7: USB Connector Pinout
State Description
On The router is booting up.
Blinking The router booted up and is ready.
Fast blinking The router firmware is being updated.
On Selected 100 Mbps bit rate
Off Selected 10 Mbps bit rate
On The network cable is connected.
Blinking Data transmission
Off The network cable is not connected.
Table 8: LED Status Indication
15
and Table 7.
Data flow direction
Input/Output
Input/Output
ICR-2701