Advertisement
PREFACE
Using the product Safety
Warranty and Liability Disclaimers
Product Operating Environment
Caution of the products described in this document
WARNING
Electric shock,
Damage
Electric shock,
Damage
Downloaded from
Elcodis.com
electronic components distributor
Thank you for purchasing the evaluation board (Part number:MB2146-401) for the F
family.
The MB 2146-401 is a development support tool for developing and evaluating applied products
2
2
based on the F
MC-8FX*
family of the 8-bit microcontroller manufactured by Fujitsu.
This manual is intended for engineers who use the MB2146-401(hereafter called the evaluation
board)to develop applied products based on Fujitsu F
The manual describes how to handle the evaluation board and its function and setting procedures.
Be sure to read it before using the evaluation board.
Consult the Sales representatives or the Support representatives of Fujitsu Limited for mass-pro-
duced MCUs and evaluation MCUs.
2
*1 : F
MC is the abbreviation used for FUJITSU Flexible Microcontroller.
*2 : Henceforth, Evaluation MCU is called.
This manual contains important information required for using the MB2146-401 safely. Be sure to
read through the manual before using the product and follow the instructions contained therein to use
it correctly.
In particular, carefully read "Caution of the products described in this document" at the beginning of
this manual to understand the requirements for safe use of the product before using it.
After reading the manual, keep it handy for future reference.
The specifications of the product are subject to change without notice.
In no event shall Fujitsu be liable for any loss or damages whatsoever directly or indirectly arising
out of the use of the product.
Use the product at an operating temperature between 5 °C to 35 °C and at an operating humidity be-
tween 20 % to 80%. Avoid using it in a hot or humid environment and prevent condensation.
The product is a frameless PC board unit with all electronic components exposed. Therefore, neither
put anything on the product nor touch or let an electrically charged material contact a metal part of
it. Once the product has been powered, try to keep those objects away from it which can short-circuit
it or easily catch fire and burn. Use the product as horizontal as possible and avoid operating it at a
place exposed to strong vibration, dust, or explosive gas.
Note that using the product not in the above operating environment may unexpectedly cause personal
injury to the user (or another person if present near the product) or physical damage to properties
around the product.
You should also keep the packaging materials used for shipping the product. They work well as they
are when you transport the product again, for example, if it becomes out of order and needs to be
repaired.
The following precautions apply to the product described in this manual.
Indicates a potentially hazardous situation which, if not avoided appropriately,
could result in death or serious injury and/or a fault in the user's system.
Before performing any operation described in this manual, turn off all the power
supplies to the system. Performing such an operation with the power on may
cause an electric shock or device fault.
Once the product has been turned on, do not touch any metal part of it.
Doing so may cause an electric shock or device fault.
2
MC-8FX family of the 8-bit microcontroller.
i
2
1
MC *
-8FX
Advertisement
