Device And Sim Card Security; Restore Original Settings; Positioning Settings; Positioning Methods - Nokia Mode User Manual

Avoid using codes that are similar to emergency numbers to prevent accidental dialing
of the emergency number. Codes are shown as asterisks. When you change a code, enter
the current code, then the new code twice.

Device and SIM card security

To change the PIN code, select
be 4 to 8 digits long. The PIN code protects your SIM card against unauthorized use and
is provided with the SIM card. After three consecutive incorrect PIN code entries, the
code is blocked and you need to use the PUK code to unblock it before you can use the
SIM card again.
To set the keypad to lock automatically after a defined period, select
card Keypad autolock
>
To set a time-out after which the device is automatically locked and can be used only if
the correct lock code is entered, select
period. Enter a number for the time-out in minutes or select
period. When the device is locked, you can still answer incoming calls, and calls may still
be possible to the official emergency number programed into your device.
To set a new lock code, select
is 12345. Enter the current code and then the new code twice. The new code can be
4-255 characters long. Both alphabets and digits can be used, and both uppercase and
lowercase alphabets are possible. The device notifies you if the lock code is not properly
formatted.

Restore original settings

To restore the original device settings, select
General Factory
>
the device may take a longer time to power on. Documents, contact information,
calendar entries, and files are unaffected.

Positioning settings

Select Menu Ctrl. panel
>
To use a specific positioning method to detect the location of your device, select
Positioning methods.
To select a positioning server, select
To select which measurement system you want to use for speeds and distances, select
Notation preferences
E-mail key settings
Select Menu Ctrl. panel
>
© 2010 Nokia. All rights reserved.
Phone and SIM card
period.
Phone and SIM card
settings. To do this, you need your device lock code. After resetting,
Settings
>
Positioning
Measurement
>
Settings
>
PIN
>
Phone and SIM card
Lock
>
Menu Ctrl. panel
>
and General > Positioning.
server.
system.
and General > Email.
code. The new code must
Phone and SIM
Phone autolock
>
None to set off the autolock
code. The preset lock code
Settings
>
Settings
and
49