Nokia Mode User Manual page 52

Settings
Depending on the data connection you select, only certain setting fields are available.
Fill in all fields marked with
empty, unless your service provider has instructed otherwise.
To use a data connection, your service provider must support this feature, and if
necessary, activate it for your SIM card.
Create a new access point
Select Menu Ctrl. panel
>
You may receive access point settings in a message from a service provider. Some or all
access points may be preset for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you select one of the access point groups (
access point types:
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN with the WLAN wizard.
To create a new access point, select
available connections. After the search, connections that are already available are
displayed and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, select one of the access point groups, scroll to
an access point, and select Edit. Use the instructions provided by your service provider
to edit the following:
Connection name
•
Data bearer — Select the data connection type.
•
Depending on the data connection you select, only certain setting fields are available.
Fill in all fields marked with
empty, unless your service provider has instructed otherwise.
To use a data connection, your service provider must support this feature, and if
necessary, activate it for your SIM card.
Packet data (GPRS) settings
Select Menu Ctrl. panel
>
Your device supports packet data connections, such as GPRS in the GSM network. When
you are using your device in GSM and UMTS networks, it is possible to have multiple data
connections active at the same time; access points can share a data connection, and
data connections remain active, for example, during voice calls.
52
Must be defined
Settings
>
Access
— Enter a name for the connection.
Must be defined
Settings
>
or with a red *. Other fields can be left
and Connection
, ,
point. The device asks you to check for
or with a red *. Other fields can be left
and Connection
© 2010 Nokia. All rights reserved.
> Destinations.
, , ), you can see the
Packet data.
>