Access Points; Create A New Access Point - Nokia Mode User Manual

Destinations
•
may be preset for your device by your service provider, and you may not be able to
create, edit or remove them.
VPN — Manage the settings for virtual private networking.
•
Packet data — Define when packet data network is attached, and enter the default
•
packet switched access point name if you use your device as a modem for a computer.
Wireless LAN
•
available, and define how often the device searches for networks.
Video sharing
•
define the video saving settings.
SIP settings — View or create session initiation protocol (SIP) profiles.
•
XDM profile — Create an XDM profile. The XDM profile is required for many
•
communications applications, for example, presence.
Presence — Edit the settings for presence (network service). To register for the
•
service, contact your service provider.
Remote drives
•
Configurations
•
receive configuration settings.

Access points

Create a new access point

Select Menu Ctrl. panel
>
You may receive access point settings in a message from a service provider. Some or all
access points may be preset for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you select one of the access point groups (
access point types:
indicates a protected access point
indicates a packet data access point
indicates a Wi-Fi access point
To create a new access point, select
available connections. After the search, connections that are already available are
displayed and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, select one of the access point groups, scroll to
an access point, and select Edit. Use the instructions provided by your service provider
to edit the following:
Connection name
•
Data bearer — Select the data connection type.
•
© 2010 Nokia. All rights reserved.
— Set up new or edit existing access points. Some or all access points
— Set the device to display an indicator when a Wi-Fi network is
— Enable video sharing, select the SIP profile for video sharing, and
— Connect the device to a remote drive.
— View and delete trusted servers from which your device may
Settings
>
— Enter a name for the connection.
and Connection
, ,
Access point. The device asks you to check for
> Destinations.
, , ), you can see the
Settings
51