Sony NWZ-S754 Service Manual page 6

NWZ-S754/S755
6. The WALKMAN reboots automatically after the destination
data is updated. After rebooting, check that connecting USB
(MTP) is displayed on the liquid crystal display of the WALK-
MAN.
7. Input "EXIT" to close the command prompt application soft-
ware.
8. Disconnect the WALKMAN from PC.
9. Turn the power on of the WALKMAN.
10. Press the [BACK] key for more 1.5 seconds, the home menu is
displayed.
11. Slide the [HOLD] key from OFF to ON.
12. Press the key as following order.
] → [ ] → [VOL +] → [VOL –] → [
[
B b
[OPTION] → [BACK] → [OPTION] → [BACK]
13. The WALKMAN reboots and the color bar is displayed on the
liquid crystal display.
14. Enter the test mode when any keys are pressed in the state of
step 13, and slide the [HOLD] key from ON to OFF.
15. Press the [ ]/[ ] keys to select the "OTHER", and press the
v V
[ ] key to enter the minor item.
B
16. Press the [ ]/[ ] keys to select the "DEST".
v V
17. Press the [ ] key, and check if the destination is updated
u
properly.
MATAPP (X.XX.XX)
POWER
AUDIO
VIDEO
VIDEO OUT
OTHER CLOCK
CLESTE KEY
DAC KEYNUM
DIREC FORMAT
FM DEST
NC SPSET
SHUTDOWN FWVER
EXITTEST NCAPCHK
18. Press the [BACK] key twice, return to major item selection
screen.
19. Press the [ ]/[ ] keys to select the "EXITTEST", and press
v V
the [ ] key to select the "SURE ?".
B
20. Press the [ ] key, turn the power off and release the test
u
mode.
Note: Execute "Reset all settings" absolutely at the end (Refer to right).
6
2. Format
Formatting memory [Format]
You can format the built-in fl ash memory of the player.
] → [ ] →
B b
1. From the Home menu, select
2. Select [Yes].
3. Select [Yes].
3. Reset all setting
Returning to the factory settings [Reset All Settings]
You can reset the player to the default settings. Resetting the player
will not delete data such as music, video, and photos.
OTHER DEST
E [ SPS: OFF ]
1. From the Home menu, select
4. Wallpapers setting
How to install the wallpaper fi les into the WALKMAN.
Note: Confi rm the method of obtaining the
Procedure:
1. Unzip the wallpaper fi les to get the following fi les (jpeg fi le).
Folder name: WALLPAPERS
2. Connect the WALKMAN to PC.
3. Start up windows explorer. Then, open [WALKMAN] - [Stor-
4. Open "PICTURE" folder located under "StorageMedia" fold-
5. Copy the "WALLPAPERS" folder in step 2 under the "PIC-
Note:
• If the memory is formatted, all data (songs, videos, photos, etc.,
including sample data installed at the factory, bundled software in-
staller, and the User Guide) will be erased. Be sure to verify the data
stored in memory prior to formatting, and export any important data
to the hard disk of your computer.
• Be sure not to initialize (format) the built-in fl ash memory of the
player using Windows Explorer. If you have formatted with Win-
dows Explorer, format again using the player.
tings] , [Reset/Format] , [Format].
[All data, including music fi les and bundled software, will be
deleted. Do you want to continue?] appears.
[All data will be deleted. Proceed?] appears.
• To cancel the operation, select [No].
When initialization fi nishes, [Memory formatted.] appears.
• To cancel the operation, select [No].
Note:
• If you select this function during playback, the player will pause
playback before performing the reset process.
tings] , [Reset/Format] , [Reset All Settings] , [Yes].
[Restored factory settings.] appears.
• To cancel the operation, select [No] on the confi rmation
screen.
headquarters.
W001.jpg
W002.jpg
W003.jpg
W004.jpg
W005.jpg
W006.jpg
W007.jpg
W008.jpg
W009.jpg
ageMedia].
er.
TURE" folder.
[Settings] , [Common Set-
[Settings] , [Common Set-
wallpaper fi les
to the service