Selecting An Internet Access Point; Access Point Groups - Nokia E62 Configuring

→
Select Menu Connect.
passthrough to use the data cable for the IP passthrough
Internet access point.
Nokia Network Bridge (which can be downloaded from
forum.nokia.com) is the IP passthrough application that
allows you to obtain a network connection on your device
from a compatible PC through a USB data cable. Connect
the USB data cable to the bottom of the device. Connect
the other end of the data cable to a compatible PC, and
wait for the PC to recognize your device.
Use IP passthrough as you use any Internet access point
to browse or synchronize remotely. If a wireless network
connection is unavailable, use IP passthrough to access
the Internet or a LAN. You cannot use IP passthrough at
the same time as Nokia PC Suite. You cannot activate the
modem if you select IP passthrough in cable connection
settings.
Selecting an Internet access
point
When you establish an Internet connection, you are asked
to select the Internet access point you want to use for
that connection. Select an Internet access point from the
list of available access points, and press Select.
8
Copyright © 2006 Nokia. All rights reserved.
→ → →
Data cable Options IP Tip: The Select access point
you have selected
field in the Web settings. Otherwise, the
selected default Internet access point is used.
To check the status of the setting, select
→ →
Menu Web

Access point groups

→ →
Select Menu Tools Settings
point groups.
An access point group is used for grouping and prioritizing
access points. An application can use a group as a
connection method instead of a single access point. In
that case the best available access point inside a group is
used for making connection and in case of email, also for
roaming.
To create an access point group, select
→ →
groups Options New groups. In the
enter a name for the group. Define in the
field whether to show the connection switching process
on the display of your device. Choose and edit the access
points that belong to this group in the
section.
To remove an access point in an access point group, select
the access point and Options
dialog opens only if
Always ask in the Access point
→
Options Settings.
→ →
Connection Access
Access point
Group name field,
Conn. switching
Access points
→
Remove.