Configuring Internet Connection Settings; Selecting An Internet Access Point - Nokia 9500 User Manual

C o n t r o l p a n e l
• On the Settings page, you can define additional settings related to EAP-TLS. For instructions on modifying these settings, see
the Help function in the device.
Modifying the EAP-PEAP settings
To modify the EAP-PEAP settings for an Internet access point, select
access point from the list, and press
• On the User certificates
This page lists all personal certificates installed on the device. The certificates are enabled by default. To disable a certificate,
select the certificate, and press Disable.
• On the CA certificates page, select which authority certificates are valid for server verification in wireless LAN authentication
when using this Internet access point. This page shows all the installed authority certificates on the device. All certificates
are enabled by default. To disable a certificate, select the certificate, and press Disable.
• On the Cipher suites page, select which TLS (transport layer security) cipher suites you want to use with this Internet access
point. To enable a selected cipher suite, press Enable.
• On the EAP types page, select and configure the authentication methods you want to run inside the EAP-PEAP method. Press
Priority, and then Move up
• On the Settings page, you can define additional settings related to EAP-PEAP. For instructions on modifying these settings,
see the Help function in the device.
Modifying the EAP-LEAP settings
To modify the EAP-LEAP settings for an Internet access point, select
access point from the list, and press
you enter your user name in the
not want to be asked for the password, select
Note that if you select No
security.

Configuring Internet connection settings

These settings affect all Internet connections.
To configure common Internet connection settings, select
time period after which the connection ends automatically and returns to standby mode if not used. You can specify a different
time for each connection type, but the setting affects all Internet access points using that connection type.
Some Internet connections may appear inactive, but they may still be sending and receiving data in the background. These
connections may postpone the closing of the connection.
Select the Other page, and define the settings.
Ask before connecting
•
the connection or to change the Internet access point.
GPRS operating mode
•
on quickly when needed. If you select
or action that needs it. Note that if there is no GPRS coverage and you selected
establish a GPRS connection.
To change the priority of Internet access points, select
point, and press Move up
you have specified.

Selecting an Internet access point

When you establish an Internet connection, you are asked to select the Internet access point you want to use for that connection.
In the Network connection
filter the list of access points according to the network type. To view all Internet access points, select
Internet access points that are currently available, press
GPRS or GSM Internet access points are shown in the list.
Tip: The Network connection
Internet access point settings. To check the status of the setting, select
Connections Internet setup
>
Tip: If you have problems establishing a wireless LAN connection, try selecting
option: go to Desk
consumption increases when a wireless LAN connection is used, and simultaneous wireless LAN and Bluetooth
connections are not possible.
Copyright © 2004-2005 Nokia. All rights reserved.
Edit > Advanced. Select the
page, select the personal certificates for user authentication when using this Internet access point.
and Move down to change the priority order of the tunneled EAP types.
Edit > Advanced. Select the
Username field, you need not give the user name during an authentication session. If you do
No
in the Password prompt
— If you select Yes, a dialog appears every time you connect to the Internet, asking you to confirm
— Select Always on to keep the GPRS connection in alert mode and to switch the packet data transfer
On when needed, the device uses a GPRS connection only when you start an application
or Move down. When you establish a data connection, the access points are searched for in the order
dialog, select an Internet access point from the list, and press Connect. Before connecting, you can
dialog opens only if you have selected
Other page.
>
Tools Control panel
> >
Connections
EAP page. Select EAP-PEAP from the list, and press Configure.
Connections
EAP page. Select EAP-LEAP from the list, and press Configure. If
in the Password prompt
field, the password is stored in the device, and this decreases the level of
Connections Internet
>
Connections Internet
>
Show available. For example, if you are using the
Connections Wireless LAN
> >
74
Internet setup. Select a wireless LAN Internet
>
Internet setup. Select a wireless LAN Internet
>
field, and enter the password in the
setup. Select the Idle
Always on, the device will periodically try to
setup. Press Priority, select an Internet access
Yes in the Ask before connecting
Desk Tools Control
> >
Disabled for the
> Settings. If you select Disabled, the power
Password field.
page, and define the
All networks. To view
Offline profile, no
field in the general
panel, and
WLAN power saving