Nokia E60 Connection Manual page 7

your service provider or network operator.
Otherwise, the name server addresses are provided
automatically.
•
Proxy serv. address — Enter the address of the proxy
server. Proxy servers are intermediate servers
between a browsing service and its users, which are
used by some service providers. These servers may
provide additional security and speed up access to
the service.
Creating an Internet access point
for WLAN
→ →
1
Select Menu Tools Settings
points.
2
The list of existing access points is shown. Press
→
Options New access point
access point.
To use an existing access point as a basis for the new
one, select Use existing settings. To start with an empty
access point, select Use default
3
Define the following settings:
•
Connection name — Type a descriptive name for the
Internet access point, such as My WLAN Internet.
•
Data bearer — Select Wireless
•
WLAN netw. name — To enter the service set identifier
(SSID), that is, the name that identifies the specific
wireless LAN, select Enter
network from the wireless LANs in range, select
Search for netw..
→ →
Connection Access
to create a new Internet
settings.
LAN.
manually. To select the
•
Network status — Select
are connecting to is hidden, or
hidden.
•
WLAN netw. mode — If you select Infrastructure,
devices can communicate with each other and with
wired LAN devices through a wireless LAN access
point. If you select Ad-hoc, devices can send and
receive data directly with each other, and no
wireless LAN access point is needed.
•
WLAN security mode — You must select the same
security mode that is used in the wireless LAN
access point. If you select
privacy), 802.1x, or WPA/WPA2
access), you must also configure the relevant
additional settings as described in step 4.
•
Homepage — Enter the Web address of the page you
want to display as a home page when you use this
access point.
Note: The settings available for editing
may vary.
4
If you selected WPA/WPA2
define the following in WLAN security
•
WPA mode — Select EAP
module for authentication. If you select
key, type the password (also called a master key) in
the field. Note that the same key must be entered in
the wireless LAN access point.
•
EAP plug-in settings — If you selected EAP, you must
also define these settings. See page 9 for more
information.
Copyright © 2006 Nokia. All rights reserved.
Hidden if the network you
Public if it is not
WEP (wired equivalent
(Wi-Fi protected
as the WLAN security mode,
sett.:
if you want to use an EAP
Pre-shared
7