InnovAntennas 10-6 SERIES INTRODUCTION Thank you for choosing InnovAntennas. Many dual or multiband Yagis suffer compromising effects as a result of negative interaction between elements in use and others on the same boom. However, 6m and 10m are two bands where the impact is small.
InnovAntennas 10-6 SERIES BOOM ASSEMBLY Frontally match the boom sections with the same letters (AA, BB, CC, …). The boom parts with the same cross-sectional sizes are joined by one or multiple boom insert(s) as shown below: Boom insert 8 x screw DIN 7380 per joint...
InnovAntennas 10-6 SERIES ELEMENT ASSEMBLY The 28MHz and 50MHz elements are mounted to the boom differently from one another. The 28MHz elements are held in place with plate which support 2 insulator holders for each element (one either side of the boom) whilst the 50MHz element are held in place by a single insulator bolted directly to the boom.
Page 7
InnovAntennas 10-6 SERIES Socket head screw DIN 912, M6 x 45 Screw DIN 7991, M6 Boom size DIN 7991 (cross section) screw length 40x40 mm 60 mm 50x50 mm 70 mm Plastic block Ø 20 mm (EAHYP020) Central 10m element part...
Page 8
InnovAntennas 10-6 SERIES 10 m / 28 MHz ELEMENTS (driven element DE with feed point) The active element has central screw terminals and a center insulator. It is secured fourfold to the element holder as shown below. Otherwise, the mounting material is the same as shown on the previous page.
Page 9
InnovAntennas 10-6 SERIES Element extensions All elements are assembled and fixed in length by hose clamps: Hose Clamp 12 – 22 mm Hose Clamp 10 – 16 mm Hose Clamp 8 – 12 mm The drawings on the following pages show the elements with their extension(s) telescopically mounted for your antenna model.
Page 10
InnovAntennas 10-6 SERIES Polycarbonate element spacer + cable ties to stabilize 10m + 6m driven elements Model 10-6 4plus4 8-Element Extension 3 Extension 2 Extension 1 Element Diameters Drawing not to scale 10 m / 28 MHz Central part: 20 mm...
Page 11
InnovAntennas 10-6 SERIES Model 10-6 4plus5 9-Element Extension 2 Extension 1 Drawing not to scale Element Diameters 10 m / 28 MHz Central part: 20 mm Extension 1: 16 mm Extension 2: 13 mm 6 m / 50 MHz Central part: 16 mm Extension 1: 13 mm Doc Version 1.3, 13JAN2023...
Page 12
InnovAntennas 10-6 SERIES Model 10-6 5plus6 11-Element Polycarbonate element spacer + cable ties to stabilize 10m + 6m driven elements Extension 3 Extension 2 Extension 1 Drawing not to scale Element Diameters 10 m / 28 MHz Central part: 20 mm...
InnovAntennas 10-6 SERIES MAST MOUNT Washer DIN 127, M6 Nut DIN 912, M6 S127-96 S985-906 4 x Washer DIN 127, M8 S127-98 4 x Nut DIN 934, M8 S934-98 Counter plate EA010085 U-bolt M8 A-0163 Mast/boom plate Metal bracket 50 mm 23035.50...
Need help?
Do you have a question about the InnovAntennas 10-6 Series and is the answer not in the manual?
Questions and answers