9-Troubleshoot Ing - Haier HW80-BP14636N User Manual

9-Troubleshoot ing

of a problem please check all shown possibilit ies and follow below inst ruct ions before you
cont act an after sales service. See CUSTOMER SERVICE.
WARNING!
▶
Before maintenance, deact ivate t he appliance and disconnect t he mains plug from
t he mains socket .
▶
improper repairs can cause considerable consequent ial damages.
▶
A damaged power cable should only be replaced by t he manufacturer, it s service
9.1 Information codes
Following codes are displayed only for informat ion referring to t he washing cycle. No
measures must be performed.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
1:25
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
6:30
utes.
1/ 2/ 3 addit ional rinses are choosen (see FUNCTION BUTTONS "Ext ra rinse").
P--1/2/3
End
Funct ion child lock is act ivated.
cLo 1-
Door is closed because of high water level, high water temperature or spinning cy-
Loc
1-
cle.
The buzzer is deact ivated.
bEEP OFF
The buzzer is act ivated.
bEEP ON
Funct ion "Speed up" is act ivat ed.
SPEEd up
9.2 Troubleshooting with display code
Problem Cause
• Drainage error
CLR FLTR
•
Lock error.
E2
• Water level not reached.
E4
• Drain hose is self- syphoning.
• Water protective level error.
E8
22
.
Solution
•
•
Check drain hose inst allat ion.
•
Shut the door properly.
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.
• Contact the After sales service.
GB