Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Caraudio-Systems RL-MFD1
Summary of Contents for Caraudio-Systems RL-MFD1
- Page 1 RL-MFD1 Audio-video-input compatible with navigation systems Volkswagen MFD1 and Audi Navigation Plus AV-input to connect any AV-source or rear view camera to the factory navigation system Version 04.11.2022 RL-MFD1...
- Page 2 To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. Version 04.11.2022 RL-MFD1...
- Page 3 VW MFD1 (4:3), Audi Navigation Plus (4:3) Limitations Factory-TV-tuner Must NOT be installed Factory-rear-view- camera Must NOT be installed Video-source Interface is initialized to PAL Automatic camera switching Not possible with all VW MFD1 versions, generally not possible with Audi Navigation Plus Version 04.11.2022 RL-MFD1...
- Page 4 In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Place of installation is behind the head-unit. Version 04.11.2022 RL-MFD1...
- Page 5 Note: If the female 10pin DIN-connector of the head-unit is already occupied, the vehicle has a factory TV-tuner. In this case it must be uninstalled: disconnect the male 10pin DIN- connector of the factory harness and disconnect all wires from the factory TV-tuner. Version 04.11.2022 RL-MFD1...
- Page 6 If connecting an AV-Source, connect the audio RCA of the AV-source to female audio RCA-connector of harness RLC-VN01. Note: The interface is initialized to PAL. Cut and isolate both ends of the brown cable of harness RLC-VN01 if you want to connect a NTSC-source. Version 04.11.2022 RL-MFD1...
- Page 7 With some VW MFD1 versions and with Audi Navigation Plus is a automatic rear-view camera activation not possible. In these cases, the rear-view camera image must be activated manually (see chapter "3.3 Activating the interface as the current AV source"). Version 04.11.2022 RL-MFD1...
- Page 8 Temperature range -30°C to +80°C Weight Measurements (box only) B x H x T 72 x 23 x 50mm 5. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ®...
Need help?
Do you have a question about the RL-MFD1 and is the answer not in the manual?
Questions and answers