Table of Contents
Advertisement
Quick Links
z.LiNK-Interface
ZL-MYGIG-V2-R
Audio-video-input and rear-view camera input
incl. video-in-motion
compatible with Chrysler, Dodge and Jeep
vehicles
with MYGIG navigation systems
AV-input to connect any AV-source
and a rear-view camera
to the factory navigation system
incl. video-in-motion
Version 10.06.2013
ZL-MYGIG-V2-R
Advertisement
Table of Contents
Related Manuals for Caraudio-Systems ZL-MYGIG-V2-R
Summary of Contents for Caraudio-Systems ZL-MYGIG-V2-R
- Page 1 ZL-MYGIG-V2-R Audio-video-input and rear-view camera input incl. video-in-motion compatible with Chrysler, Dodge and Jeep vehicles with MYGIG navigation systems AV-input to connect any AV-source and a rear-view camera to the factory navigation system incl. video-in-motion Version 10.06.2013 ZL-MYGIG-V2-R...
-
Page 2: Table Of Contents
MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free Version 10.06.2013 ZL-MYGIG-V2-R... -
Page 3: Prior To Installation
MYGIG REW, RER, REN and RHW with low-speed-B-CAN (83 kbit) Limitations Factory-RSE Must NOT be installed. Factory-rear-view cam Must NOT be installed. Video-sources Only compatible to NTSC-video-sources. For vehicles with high-speed IHS-CAN (125 kbit) the ZL-MYGIG-R must be used! Version 10.06.2013 ZL-MYGIG-V2-R... -
Page 4: Pin Assignments
Ground ● black → pin 7 Audio output RCA female red/white Audio signal (right) ● → pin 20 Audio signal (left) ● white → pin 18 Audio ground ● black → pin 19 Pin-assignment white 22pin connector Version 10.06.2013 ZL-MYGIG-V2-R... - Page 5 Version 10.06.2013 ZL-MYGIG-V2-R...
-
Page 6: Connection Schema
2. Connection schema Version 10.06.2013 ZL-MYGIG-V2-R... -
Page 7: Installation
In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Place of installation is behind the head-unit. Version 10.06.2013 ZL-MYGIG-V2-R... - Page 8 There are 2 options if the pins are occupied by factory: 1. Factory-RSE is installed. This interface will not be needed (separate video-in-motion TF-MYGIG optionally available). 2. Factory RSE isn’t installed. The pins are prepared by factory and can be removed. Version 10.06.2013 ZL-MYGIG-V2-R...
-
Page 9: Activation Of The Interface As Current Av-Source
Connect a switch to the green cable and connect the green cable to +12V ACC. ● +12V = TV-Free is activated ● = TV-Free is not activated Note: The loose white cable is not required and must be isolated. Version 10.06.2013 ZL-MYGIG-V2-R... -
Page 10: Specifications
Temperature range -30°C to +80°C Weight Measurements (box only) B x H x T 70 x 20 x 47 mm 6. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ®...
Need help?
Do you have a question about the ZL-MYGIG-V2-R and is the answer not in the manual?
Questions and answers