Usb-av-player compatible with navigation systems volkswagen mfd2/rns2, rns510, rns810 skoda nexus/columbus seat trinax (19 pages)
Summary of Contents for Caraudio-Systems TF-U500
Page 1
TV-Free Universal video-in-motion Interface TF-U500 Non p and p version for high speed CAN Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product.
Page 2
1.1. Delivery contents Take down the SW-version and HW-version of the interface-boxes, and store this manual for support purposes! CAN-box TV-500 Harness HW_____ SW_____ TV-UNI With USB update-port for software-updates by consumer! Version 10.03.2020 TF-U500...
Page 3
Dip 2 – no function (in some vehicles for rear-view camera) Dip 3 – no function Dip 4 – no function Dip 5 – CAN-bus termination resistor on the vehicle side Dip 6 – CAN-bus termination resistor on the head-unit side Version 10.03.2020 TF-U500...
Page 4
Note: The loose white cable is not required and must be isolated. *Exception: On vehicles/navigation systems with Dip 1 must be set to OFF and video-in- motion activation performs selectively by vehicle button, the activation by green cable isn’t possible! Version 10.03.2020 TF-U500...
Page 5
Long blinking of the navigations backlight = TV Free ON Short blinking of the navigations backlight = TV Free OFF Note: While the video-in-motion function is activated, the navigation performance is not possible! Version 10.03.2020 TF-U500...
Page 6
CAN LOW Pin 12 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 7
CAN LOW Pin 12 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 8
CAN LOW Pin 9 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 9
CAN LOW Pin 16 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 10
Ground Pin 8 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 11
Ground - Pin 12 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 12
Pin 43 Ground No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 13
Longpress the “SRC”-button on the steering wheel (about 3 seconds) to activate/deactivate the video-in-motion function. When ignition is off, the video-in-motion interface will be automatically disabled. Note: While the video-in-motion function is activated, the navigation performance is not possible! Version 10.03.2020 TF-U500...
Page 14
In this case you have to connect the green cable as described in chapter “Exception: Vehicles with RT3-N3 CAN and RT 4 without Source-button” and set Dip 1 to OFF. Version 10.03.2020 TF-U500...
Page 15
Ground - Pin 12 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 16
Connector B No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 17
Pin 3 CAN-LOW No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 18
(e.g. Grey/Orange = CAN-LOW)! No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 19
Purple/Orange (Pin 1) CAN-LOW No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 20
Ground - Pin1 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 21
For video in motion cut and isolate additionally the analogue speedsignal wire (pin 16, connector B) (navigation still works over GPS reception). Optionally, a switch can be installed in the severed speedsignal wire (for the case when GPS reception is bad or not available). Version 10.03.2020 TF-U500...
Page 22
Dip 2 – factory rear-view camera existing Dip 3 – TV icon simulation Dip 4 – no function Dip 5 – CAN-bus termination resistor on the vehicle side Dip 6 – CAN-bus termination resistor on the head-unit side Version 10.03.2020 TF-U500...
Page 23
Yellow CAN-LOW No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 24
Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to ON, too. Version 10.03.2020 TF-U500...
Page 25
Yellow CAN-LOW No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 26
Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to ON, too. Version 10.03.2020 TF-U500...
Page 27
CAN-LOW Pin 1 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 28
Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to ON, too. Version 10.03.2020 TF-U500...
Page 29
Pin 11 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 30
Ground - Pin1 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 31
CAN-LOW C2 Pin 8 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 32
CAN-LOW C2 Pin 17 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 33
CAN-LOW Pin 4 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 34
11/2011, SLK-class (R172) from 03/2011, SL-class (R231) from 2012, VW Crafter Navigation Comand APS NTG2/NTG2.5/NTG4-204/NTG4-212, Comand Online NTG 4.5 Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Vehicles with NTG2/NTG4-xxx Vehicles with NTG2.5/NTG4.5 Version 10.03.2020 TF-U500...
Page 35
3 seconds to activate/deactivate the video-in-motion function. When the ignition is off, the video-in-motion interface will be automatically disabled. Note: As long as the video-in-motion function is activated, the navigation of the command will NOT be working! Version 10.03.2020 TF-U500...
Page 36
CAN-LOW Pin 11 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 37
● Purple No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 38
CAN LOW - Pin 22 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 39
CAN LOW Pin 2 (Kammer C1) No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 40
CAN LOW Pin 9 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 41
CAN LOW Pin 12 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 42
CAN LOW Pin 11 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 43
Ground ●● Grey/Orange CAN HIGH Pin 10 ●● Purple/Orange CAN LOW Pin 09 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. Version 10.03.2020 TF-U500...
Page 44
Connect a switch to the green cable and connect the green cable to +12V ACC. ● +12V = TV-Free is activated ● = TV-Free is not activated Note: As long as the video-in-motion function is activated, the navigation will NOT be working! Version 10.03.2020 TF-U500...
Page 45
CAN LOW Pin 10 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 46
CAN LOW Pin 10 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 47
CAN LOW Pin 12 No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer. The video-in-motion function is activated permanently without disturbing the navigation performance. Version 10.03.2020 TF-U500...
Page 48
Temperature range -30°C to +80°C Weight Measurements (box only) W x H x D 76 x 27 x 54 mm 4. Technical support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ®...