Advertisement
Quick Links
Interface for activation of
factory rear-‐view camera input
for Uconnect 5" or 8,4" system
Video input to connect a rear-‐view camera
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-‐view-‐camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle's software can cause malfunctions of the interface. We
offer free software-‐updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-‐updates will not be refunded.
Version 01.04.2015
r.LiNK-‐Interface
RL-‐UCON22-‐TF
with 22 pin connector
incl. video-‐in-‐motion
RL-‐UCON22-‐TF
Advertisement
Related Manuals for Caraudio-Systems RL-UCON22-TF
Summary of Contents for Caraudio-Systems RL-UCON22-TF
- Page 1 r.LiNK-‐Interface RL-‐UCON22-‐TF Interface for activation of factory rear-‐view camera input for Uconnect 5“ or 8,4“ system with 22 pin connector ...
-
Page 2: Table Of Contents
Contents 1. Prior to installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Connection scheme 1.4. Setting the Dip-‐switches of the CAN-‐box 2. -
Page 3: Check Compatibility Of Vehicle And Accessories
1.2. Check compatibility of vehicle and accessories Requirements Vehicle Chrysler, Dodge, Fiat, Jeep, Lancia Navigation Uconnect 5” / 8,4” display with 22 pin connector ... -
Page 4: Setting The Dip--Switches Of The Can--Box
1.4. Setting the Dip-‐switches of the Can-‐box Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Video-‐in-‐motion permanent ON ON OFF OFF ... -
Page 5: Installation
2. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is sleep-‐mode. In case the sleep-‐mode does not show success, disconnect the battery with a resistor lead. -
Page 6: Connections To Rear--View Camera
2.2. Connections to rear-‐view camera Rear)view1camera +12V%camera power%(max.%500mA) Harness TV)DG22 Connect the video RCA of the rear-‐view camera to the female RCA connector of the harness TV-‐DG22. -
Page 7: Activation Of The Video--In--Motion Function
5. Activation of the video-‐in-‐motion function The video-‐in-‐motion can be activated and deactivated by Dip 1 or alternatively by the included loose green cable in connection with a switch (not included in delivery). Video-‐in-‐motion permanent ...