Appendix A: Restoring Factory Default Settings - Xytronix Research & Design ControlByWeb X317 User Manual

Appendix A: Restoring Factory Default Settings

Appendix A: Restoring Factory Default Settings
In the event that the IP address or passwords are forgotten, the X-317 may be restored to its original
factory default settings.
1. Remove the DC power from the unit.
2. Use a thin, non-conductive object (such as a toothpick) to press and hold the small button located
on the bottom of the unit. When the object is inserted, a tactile feedback can be felt as the button is
depressed.
3. While depressing the button, apply power and wait for about 10 seconds before releasing the button.
All settings will be back to the original factory defaults.
4. Refer to Section 2.4 Establishing Communications for Setup to begin reconfiguration of the
device.
Page 50
X-317™ Users Manual
Xytronix Research & Design, Inc.