Table of Contents
Advertisement
Installation and Connections
2.5.3 Network Connection
Connect the Ethernet port to a 10 Base-T or 10/100 Base-T Ethernet connection. This typically connects
to an Ethernet hub, switch, or router. For configuration, the X-317 may be connected directly to the
Ethernet port on a computer using a "crossover" cable. Otherwise, for connection through a hub or
router, a standard "straight-through" cable should be used.
The X-317 can be used on a wireless network by connecting through an Ethernet bridge or a wireless
router.
Note: The wireless Ethernet bridge or router must be properly configured for the wireless network. Refer
to the installation instructions for the wireless device.
Page 14
Network Connection
Wireless Connection
X-317™ Users Manual
Xytronix Research & Design, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the ControlByWeb X317 and is the answer not in the manual?
Questions and answers