Advertisement
Detailed explanation of each part
à About the memory clamp
The memory clamp aligns the pad at a fixed height when it is attached.
When shipped, the memory clamp is attached at the recommended position for using the drum safely.
Rod
(snare holder)
PDX-8
PDX-8
Memory clamp
NOTE
If the memory clamp is moved or removed in order to adjust the position of the PDX-8 (snare), a greater
length of the rod may protrude; take care that the protruding rod does not cause injury.
à CY-5 (Hi-hat, Ride, Crash)
Pad face
Bow
Edge
Quick Start
Playing drums is not only fun, but just about anyone can easily start playing — they make sound when you simply hit them! Let's start playing drums using the wide variety of built-in sounds.
Turning the Power On/Off
Turning the Power On
1.
Connect headphones (sold separately) or amplified speakers (sold separately) to the TD-02.
* If amplified speakers are connected, minimize the volume of the amplified speakers.
* To prevent malfunction and equipment
OUTPUT/PHONES jack
failure, always turn down the volume, and
turn off all the units before making any
connections.
2.
Press the [Ā] (POWER) button.
The power to the TD-02 is turned on.
DC IN jack
3.
If amplified speakers are connected, turn on the
Connect the included AC adaptor to
power of the amplified speakers, and adjust the
this jack.
volume.
4.
Use the [Ć] [ć] (VOLUME) buttons on the TD-02
to adjust the volume.
Turning the Power Off
1.
If amplified speakers are connected to the TD-02, turn the volume of the amplified speakers all the way down
and then turn the unit off.
2.
Long-press the [Ā] (POWER) button on the TD-02.
The power to the TD-02 is turned off.
* You must turn off the power by long-pressing the [Ā] (POWER) button. The settings are not saved if the
power supply is disconnected due to the power cord getting pulled out.
Using the Auto Off Function
The power to this unit will be turned off automatically after a predetermined amount of time has passed
since it was last used for playing music, or its buttons or controls were operated (Auto Off function).
If you do not want the power to be turned off automatically, disengage the Auto Off function.
• Unsaved data is lost when the power turns off. Before turning the power off, save the data that you want to keep.
• To restore power, turn the power on again.
ØFor details on Auto off function, see the 2D code printed on the product to view the "TD-02 Owner's
Manual" (Roland website).
USING THE UNIT SAFELY
About
WARNING and
CAUTION Notices
About the Symbols
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
ALWAYS OBSERVE THE FOLLOWING
WARNING
Concerning the Auto Off function
Cautions when moving this unit
The power to this unit will be turned off automatically
If you need to move the instrument, take note of the
after a predetermined amount of time has passed
precautions listed below. At least two persons are
since it was last used for playing music, or its buttons
required to safely lift and move the unit. It should be
or controls were operated (Auto Off function). If you
handled carefully, all the while keeping it level. Make
do not want the power to be turned off automatically,
sure to have a firm grip, to protect yourself from injury
disengage the Auto Off function.
and the instrument from damage.
• Check to make sure the bolts and hand knobs securing the stand
Use only the supplied AC adaptor and the correct voltage
Be sure to use only the AC adaptor supplied with the
unit. Also, make sure the line voltage at the installation
• Disconnect the power cord.
matches the input voltage specified on the AC adaptor's
• Disconnect all cords coming from external devices.
body. Other AC adaptors may use a different polarity, or
• Disconnect the connection cable of the kick pedal.
be designed for a different voltage, so their use could
• Disconnect the connection cable of the hi-hat control pedal.
result in damage, malfunction, or electric shock.
Take care so as not to get fingers pinched
Use only the supplied power cord
When handling the following moving parts, take care
Use only the attached power cord. Also, the supplied
so as not to get fingers, toes, etc., pinched. Whenever
power cord must not be used with any other device.
a child uses the unit, an adult should be on hand to
provide supervision and guidance.
• Hi-hat control pedal
• Kick pedal
• Bottom of the cymbal pad (see figure)
• Drum sound module holder
Keep small items out of the reach of children
To prevent accidental ingestion of the parts listed below,
always keep them out of the reach of small children.
• Included Parts
• Removable Parts
à PDX-8 (Snare)
Hoop rubber
Hand knob
NOTE
Be sure to adjust the head tension of the pad before use.
NOTE
Continuous playing may cause dis-coloration of the
OUTPUT jack
pad, but this will not affect the Pad's function.
Playing
Selecting a Drum Kit
* A drum kit consists of sounds assigned to each pad.
1.
Press the [
] (DRUM KIT) button.
The DRUM KIT screen appears.
TD-02
TD-02
DRUM
01 Acoustic Jam
2.
Use the [-] [+] buttons to select a drum kit.
3.
Play the drums by striking the pads.
Power Supply
• Place the AC adaptor so that the side with text is downward.
Placement
The
symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
• Depending on the material and temperature of the surface on which
determined by the design contained within the triangle. In
you place the unit, its rubber feet may discolor or mar the surface.
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The
symbol alerts the user to items that must never be
Repairs and Data
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
• Before sending the unit away for repairs, be sure to write down the
the circle. In the case of the symbol at left, it means that
needed information. Although we will do our utmost to preserve the
the unit must never be disassembled.
data stored in your unit when we carry out repairs, in some cases,
such as when the memory section is physically damaged, restoration
The
symbol alerts the user to things that must be
of the stored content may be impossible. Roland assumes no liability
carried out. The specific thing that must be done is
concerning the restoration of any stored content that has been lost.
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
Additional Precautions
plug must be unplugged from the outlet.
• Any data stored within the unit can be lost as the result of equipment
failure, incorrect operation, etc. To protect yourself against the
irretrievable loss of data, be sure to write down the needed
CAUTION
information.
• Roland assumes no liability concerning the restoration of any stored
content that has been lost.
• Never strike or apply strong pressure to the display.
• This instrument is designed to minimize the extraneous sounds
produced when it's played. However, since sound vibrations can
be transmitted through floors and walls to a greater degree than
expected, take care not to allow these sounds to become a nuisance
others nearby.
• The rubber portion of the striking surface is treated with a
have not become loose. Fasten them again securely whenever you
preservative to maintain its performance. With the passage of time,
notice any loosening.
this preservative may appear on the surface as a white stain, or
reveal how the pads were struck during product testing. This does
not affect the performance or functionality of the product, and you
may continue using it with confidence.
• Continuous playing may cause dis-coloration of the pad, but this will
not affect the pad's function.
• Do not use connection cables that contain a built-in resistor.
(see figure)
Cymbal nut
Screws, Bolts, Bluetooth ADAPTOR jack's cover, CR2 plug's cap
Tuning bolt
OUTPUT jack
Shell
Holder
Head
à Hi-hat control pedal / kick pedal
You can check whether the pedal
is a kick pedal (KIK) or hi-hat
control pedal (HHC) by looking
at the sticker on the bottom.
Bottom of pedal
Bottom of pedal
IMPORTANT NOTES
Intellectual Property Right
• The copyright of content in this product (the sound waveform data,
style data, accompaniment patterns, phrase data, audio loops and
image data) is reserved by Roland Corporation.
• Purchasers of this product are permitted to utilize said content
(except song data such as Demo Songs) for the creating, performing,
recording and distributing original musical works.
• Purchasers of this product are NOT permitted to extract said
content in original or modified form, for the purpose of distributing
recorded medium of said content or making them available on a
computer network.
• The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Roland
is under license.
• This product includes third party open source software.
Copyright © 2009-2018 Arm Limited. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License");
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
• Roland, V-Drums are either registered trademarks or trademarks of
Roland Corporation in the United States and/or other countries.
• Company names and product names appearing in this document
are registered trademarks or trademarks of their respective owners.
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
Model Name :
Type of Equipment :
Responsible Party :
Address :
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
Telephone :
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
English
For information on AC adaptors that can be used with this product, refer to the Roland website.
Informationen zu AC-Adaptern, die mit diesem Produkt verwendet werden können, nden Sie auf der
German
Roland-Internetseite.
French
Pour savoir quels adaptateurs secteur utiliser avec ce produit, consultez le site Web de Roland.
Per informazioni sui trasformatori in CA che possono essere usati con questo prodotto, consultate il sito
Italy
Web Roland.
Para obtener información sobre los adaptadores de CA que se pueden usar con este producto, consulta el
Spanish
sitio web de Roland.
Para informações sobre adaptadores AC que podem ser usados com este produto, consulte o site da
Portuguese
Roland.
Raadpleeg de website van Roland als u meer wilt weten over netstroomadapters die u met dit product
Dutch
kunt gebruiken.
A termékhez használható hálózati adapterekkel (AC) kapcsolatos információkért keresse fel a Roland
Hungarian
weboldalát.
Více informací o AC adaptérech, které mohou být využity s tímto produktem, naleznete na internetové
Czech
stránce společnosti Roland.
Aby dowiedzieć się do jakich zasilaczy sieciowych można podłączyć ten produkt, zajrzyj na stronę
Polish
internetową rmy Roland.
Pentru informa ii privind adaptoarele de c.a. care pot utilizate cu acest produs, consulta i site-ul web
Romanian
Roland.
Informácie o sieťových adaptéroch na striedavý prúd, ktoré sa dajú použiť s týmto produktom, nájdete na
Slovak
webovej stránke spoločnosti Roland.
For oplysninger om vekselstrømsadaptere, der kan bruges sammen med dette produkt, se Roland-
Danish
webstedet.
Finnish
Tietoja tämän tuotteen kanssa käytettävistä virtalähteistä saa Rolandin verkkosivustosta.
Swedish
Information om vilka nätadaptrar som kan användas med den här produkten nns på Rolands webbplats.
Norwegian For informasjon om vekselstrømadaptere som kan brukes med dette produktet, se Roland-websiden.
à PD-4 (Tom)
Adjusting the head tension
6 6
1 1
4
4
3 3
2 2
5 5
1.
Adjust each tuning bolt a little at a time,
moving in order from one side to the opposite
side as shown in the illustration.
The appropriate amount of tension is one
that will provide approximately the same
striking response as on an acoustic drum.
NOTE
2.
Use the drum key to adjust the tension as
PD-4 does not support the use of the rim-shot
needed.
technique.
Pass cable through
slot
Sensor
Playing with the Metronome
Here's how you can play the drums while listening to the metronome.
1.
Press the [ĉ] (METRONOME) button.
The metronome turns on, and the button blinks in time with the metronome tempo.
MEM O
You can also hold down the [ENTER] button and press the [ĉ] (METRONOME) button to turn the metronome
on/off without switching screens.
2.
Press the [ĉ] (METRONOME) button again to stop the metronome.
Changing how the metronome sounds
1.
In the metronome screen, use the [ã] [â] buttons to select the item (parameter) that you want to set.
2.
Use the [–] [+] buttons to edit the value.
Parameter
Value
Explanation
ON/OFF
ON, OFF
Turns the metronome on/off.
Tempo
20–260 (bpm)
Sets the tempo.
Level
-INF–+6.0 dB
Sets the volume.
Beat
1–9 (beat)
Sets the number of beats per measure.
ń (half note)
ņ
(quarter notes)
ň
Rhythm
Sets the interval of the metronome.
(eighth notes)
Ŕ
(eighth note triplets)
Ŋ
(sixteenth notes)
Pan
L30–CENTER–R30
Sets the stereo position.
Sound
TYPE1–TYPE15
Sets the sound of the metronome.
ĉ
Specifies whether the [
] (METRONOME) button blinks in time with the
LED Sync
ON, OFF
metronome (ON) or does not blink (OFF).
3.
Press the [
] (DRUM KIT) button to return to the DRUM KIT screen.
NOTE
Note that the TD-02 does not offer Bluetooth® functionality. You'll need to attach the Boss
Bluetooth® Audio MIDI Dual Adaptor (BT-DUAL, sold separately) to use Bluetooth.
SUPPLIER'S DECLARATION OF CONFORMITY
Compliance Information Statement
TD-02
Drum Sound Module
Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938
(323) 890-3700
BLUE:
FP-80
NEUTRAL
Digital Piano
BROWN:
LIVE
Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938
(323) 890-3700
Head
OUTPUT jack
Rear side
OUTPUT jack
For the USA
For the U.K.
For EU countries
http://roland.cm/ac_adaptor
Advertisement
