Fluids And Lubricants - jcb JS70 Service Manual

Section 3
1 - 1
CAPACITIES AND SPECIFICATIONS
Note: New engines DO NOT require a running-in period. The engine should be used in a normal work cycle immediately;
glazing of the piston cylinder bores, resulting in excessive oil consumption, could occur if the engine is gently run-in. Under
no circumstances should the engine be allowed to idle for extended periods (e.g. warming-up without load).
Item
ENGINE
SLEW GEARBOX
TRACK GEARBOXES
TRACK ROLLERS AND
IDLER WHEEL
HYDRAULIC SYSTEM
SLEW RING
- BEARINGS
- GEAR TEETH
ALL OTHER GREASE
POINTS
COOLING SYSTEM
FUEL TANK
Engine Lubrication Chart
-20
9803/6020
Routine Maintenance

Fluids and Lubricants

Fluid/Lubricant
See separate chart
JCB HP Grease
JCB Gear Oil HD90
Engine Oil (see separate chart)
JCB Special Hydraulic
Fluid HP46
JCB HP Grease
JCB HP Grease
JCB HP Grease
See Coolant Mixtures
See Fuel System,
Types of Fuel
Use according to ambient temperature (°C)
-10 0
JCB SUPER 15W/40 MULTIGRADE ENGINE OIL
API CF4/SG MIL L-2104F
JCB SUPER UNIVERSAL AGRICULTURAL (10W/30)
API CE/SF MIL L-2104D
International Specification
-
Lithium based, No. 2
consistency
API-GL-5, MIL-L-2105C
-
Vickers 35VQ25/V104C:
Sundstrand, Denison and
FZG Approval Tests
Lithium based, No. 2
consistency
Lithium based, No. 2
consistency
ASTM D3306-74
ASTM D975-66T
Nos 1D, 2D
10 20
Section 3
Capacity
6.8 litres
(1.49 UK gal)
0.2 kg
(0.44 lb)
2 x 1.7 litres
(0.37 UK gal)
-
92 litres
(20.26 UK gal)
-
3.2 kg (7.14 lb)
10.1 litres
(2.22 UK gal)
140 litres
(30.8 UK gal)
30 40
1 - 1
Issue 1