Powertrain MX2 Instruction Manual
  1. Manuals
  2. Brands
  3. Powertrain Manuals
  4. Treadmill
  5. MX2
  6. Instruction manual

Powertrain MX2 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MOTORIZED TREADMILL – MODEL MX2
INSTRUCTION MANUAL
Please read these instructions carefully before use and keep for future reference.
Due to constant improvements some images and features may not be applicable.
FOR DOMESTIC INDOOR USE ONLY
WARNING: Keep young children away from this machine at all times. Contact with
the moving surface may result in severe friction burns.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Powertrain MX2

Summary of Contents for Powertrain MX2

  • Page 1 MOTORIZED TREADMILL – MODEL MX2 INSTRUCTION MANUAL Please read these instructions carefully before use and keep for future reference. Due to constant improvements some images and features may not be applicable. FOR DOMESTIC INDOOR USE ONLY WARNING: Keep young children away from this machine at all times. Contact with...

  • Page 2: Safety Notice

    1. CAUTION To avoid injuries please read this manual carefully before using the treadmill.  Before starting any exercise program you should consult your doctor to determine if you have any physical or health conditions which could create a risk to your health and safety, or prevent you from using the equipment properly.
  • Page 3  Error may be displayed if power is not stable. Please do not share points with integral equipment such as computers, air conditioners etc.  Be careful of children or other objects while folding and unfolding the machine.  Do not put machine near wet objects to avoid slippery surfaces and damage to machine 3.

  • Page 4: Product Specifications

    4. PRODUCT SPECIFICATIONS Console Pulse Sensors Handle bar Upright column Motor cover Side rail Cover End cap Foot pad Wheels Main Specifications and Parts list Main Specifications Parameters Names Description Input power voltage AC220-240V,50hz Motor power 3.0HP Speed 1.0-20.0Km/h Packing list units Name Treadmill Unit...
  • Page 5 Silicone oil Screws M8 Manual Washerφ8 Safety Key Screw M5*8 5. ASSEMBLY INSTRUCTIONS  During assembly, first insert and moderately tighten screws and when the frame has been fully assembled, inspect all the screws and tighten them completely.  Lay unit flat on the ground. Cut the nylon cable ties (where supplied) on the base. Lift the upright columns and console in the direction shown in the diagram below.
  • Page 6  Use an inner hexagon spanner (#5) and screw M8*20 to lock console to the column.  Use a screwdriver and insert screws M5*8 to attach the corner covers around the base on both sides of the treadmill.  Position the safety key in the correct position as shown below. Safety key ...

  • Page 7: Using The Treadmill

    CAUTION: Please confirm that all screws are correctly tightened according to the requirements after installation and check no part has been left out prior to connecting to power. 6. USING THE TREADMILL  Power on – Connect the power adapter to a power point and turn on the unit by using the red switch.
  • Page 8  Incline 3%, 5%, 8%, 12% and 15% Shortcuts – In running mode these keys are used as shortcuts to set incline levels.  Speed 3km/h, 6km/h, 7km/h, 9km/h, 12km/h and 16km/h Shortcuts – In running mode using these shortcuts will change the running speed accordingly. ...
  • Page 9  Manual Model Configuration： o How to enter manual mode：  Turn on the power switch which will default to the manual mode.  In standby, press Mode key to enter manual mode. o Manual mode includes three settings: time, distance, and calorie (in that sequence).
  • Page 10 o F5--FAT Index, the screen will display ----Hold the heart rate sensor with your hands for 8 seconds, and then the FAT index will show on the screen. Programs tabled below. Set Time/10=Running time of each period Time Program SPEED INCLINE SPEED INCLINE...

  • Page 11: Error Codes

    Error Codes Error code Description Solution Erroneous Connection: Possible Cause: the communication between the lower controller when the power is on, the and console is blocked, check each joint between the controller and connection between lower console, make sure that each core is fully plugged in. Check the controller and the console is connection line, replace it if is damaged.
  • Page 12 5. Routine maintenance and Instructions Warning: Before cleaning or maintaining products, please be sure the power plug is pulled out of the electric treadmill. Cleaning: Comprehensive cleaning will extend the life of the electric treadmill. Remove dust periodically in order to keep the parts clean. Be sure to clean running belt with both sides of the exposed portion, which will reduce the accumulation of impurities.
  • Page 13  To safeguard your treadmill and extend the life of the unit, it is recommended that after 2 hours of continued use, the machine be switched off and allowed to cool for a minimum of10 minutes before using it again. ...
  • Page 14 o C. If you observe that the instantaneous step makes both the treadmill belt and multi-wedge belt stop, but the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments must be made to facilitate continuous safe use ...
  • Page 15 If you are unable to supply a certificate of compliance for installation of any type as required by State & Territory Laws Contact Details Kmate Pty Ltd PO Box 234, Mount Waverley VIC 3149 Email: warranty@klika.com.au Phone: 03 9790 0055 PLEASE CHECK THE LATEST VERSION AT: https//kmate.com.au /MX2...

Table of Contents