Specification And Parameter; Rf Parameters; Electrical Parameters; Hardware Parameters - Ebyte E103-W11 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

2Specification and parameter.

2.1 RF Parameters

RF parameters
Working frequency
transmit power
Receive sensitivity
Wi-Fi version
Air rate
Blocking power
Reference distance

2.2 Electrical parameters

Main parameters
Working voltage (V)
I/O voltage
Communication level (V)
Working temperature (℃)

2.3 Hardware parameters

Hardware parameters
Packaging method
Interface
Communication interface
Dimension
Net weight
RF interface
Chengdu Ebyte Electronic
Copyright ©2012–2022,
Technology Co.,Ltd.
2400MHz～2480MHz
19.5dBm～20.5dBm
IEEE 802.11 b/g/n/ax
Performance
Min Typical value Max
3 3.3 3.6
-0.3 - 3.6
-0.3 3.3 3.6
-40 - +85
Stamp hole
UART serial port
16*24mm
IPEX/stamp hole
Value
The software is adjustable, available for user self-
-87dBm
150Mbps
The probability of burning at close range is small
10dBm
Sunny and open, antenna gain 0dBi, onboard PCB
300m
≥5V guarantees output power, higher than 5.5V will permanently burn modules
Voltage over 3.6V will cause
permanent damage to module I/O
5V TTL will permanently burn the
Value
SMD
1.3g
Equivalent impedance is about 50Ω
E103-W11 User Manual
Remark
Support ISM band
development and configuration
Air rate 500kbps
Modulation technology
\
antenna.
Remark
module
Industrial design
Remark
-
Spacing 2.0mm
TTL level
--
±0.1g
5