Table of Contents
Advertisement
2. Introduction
2.4 Controllers
HSCFHMC
3. Intelligent Fan Control
3.1 Automatic speed control
The intelligent fan control incorporates one of the latest low energy consumption EC motors. This
allows the heater to operate quietly, whilst still providing the best possible levels of comfort.
The intelligent fan control is only activated when the heat is switched on. If the heater is running
in fan/boost mode only (heat switched off), then the fan will operate at a fixed speed.
When activated, the intelligent fan control detects the temperature of the room and,
depending on which heat mode is activated, it will calculate the best possible airflow and
adjusts the fan speed accordingly.
In order to maintain a constant airflow temperature, the fan runs at a lower speed when the
ambient temperature is low and will speed up as the room is getting warmer. This will result in
reduced throw at low room temperatures.
NOTE: When turning the heater on, or changing heat mode or fan speed mode, the fan will
respond accordingly after a short time delay.
51000241 Issue 02
Controlling heaters using
HSTIRFN wireless controller
30m maximum distance
Controlling heaters using
HSCFHMC touch screen controller
HSTIRFN
maximum 8 heaters
Optional HSCHES environmental
sensor
(maximum 2 HSCHES in the system)
5
Advertisement
Table of Contents
