Elite Screens Home 2 Series User Manual

Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedure below.
The Screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop
Caution:
in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or
modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your
warranty. For more information, please contact our Technical Support Department at techsupport@elitescreens.com.
 Please retain this user's guide for future reference.
 To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
 Handle the unit carefully during transportation to avoid any damages.
 To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
 The power outlet supplying power to the unit should be close to the unit and easily accessible.
 Do not install the unit on uneven or inclined surfaces.
 Do not place any heavy objects over the power cord.
 Position the power cord properly to avoid creating a trip obstacle.
 To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the power
cord.
 The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble
this unit by yourself. No one except authorized technicians can open and make repairs to this unit.
 Make sure the power source that this unit is connected to has a continuous power flow.
 If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to
avoid over heat.
 Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
 Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.
 Avoid direct sun light, rain shower and moisture.
 Keep away from fire sources and high temperature to prevent this device from overheating.
 Cut off the power supply first before transportation or maintenance.
 To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is obvious
damage or if there are any evident broken parts.
Rev.060616-DR
Electric Motorized Projection Screen
Home 2 Series
User's Guide
www.elitescreens.com
1