Ricoh Ri 1000 Parts Replacement page 232

Ri 1000 Replace Exhaust Fans
Introduction
This TD&R document is intended to aid RICOH Ri 1000 users in providing maintenance
and basic repair service. The information provided is intended to help with performing a
Exhaust Fan replacement. Accordingly this TD&R document is limited to meet the
objectives indicated above.
The majority of the hardware used in the RICOH Ri 1000 Direct to Garment printer is in
Metric series.
When performing maintenance on the machine, be sure to wear commercially available
goggles, gloves and a mask.
Scope
This applies to RICOH Ri 1000 printers.
Symptoms/ When To Change
1) Service call SC 910 Fan 1,911 Fan 2 or 912 Fan 1 and 2 Fan lock detection
2) Observation that fans can not be heard during printing
Supplies
Required supplies:
1. Exhaust fan ()
2. #1 Phillips Head Screwdriver
232