Ricoh Ri 1000 Parts Replacement page 159

Ri 1000 Replace Exhaust Fans Filters
Introduction
This TD&R document is intended to aid RICOH Ri 1000 users in providing maintenance
and basic repair service. The information provided is intended to help with performing a
Fan Filter replacement. Accordingly this TD&R document is limited to meet the
objectives indicated above.
The majority of the hardware used in the RICOH Ri 1000 Direct to Garment printer is in
Metric series.
When performing maintenance on the machine, be sure to wear commercially available
goggles, gloves and a mask.
Scope
This applies to RICOH Ri 1000 printers.
Symptoms/ When To Replace
1. This part should be changed when prompted by the part replacement warning due
to the life count for the part
Supplies
Required supplies:
1. Fan Filter
159