Review Settings
• Now, all settings are shown so they can be reviewed before starting the
upload.
• If you are satisfi ed, click the Upload button to start the uploading to
the printer. If not, use the <Back button to return to the appropriate
screen where you can do the desired changes. Then click the Next>
button until this screen appears, check the settings again, and click the
Upload button to start the uploading.
By clicking the Verify Connection box, you can make the wizard
check if the printer has a valid IP confi guration.
Intermec EasyLAN Network Setup—User's Guide
Chapter 2—Running the EasyLAN Network Setup
17